Ooh That's Stiff
Ooh That's Stiff
Author
Discussion

Marty V8

Original Poster:

578 posts

215 months

Friday 9th April 2010
quotequote all
Hi all,

Is it just an added feature of my Griff, or are all caps on swirl pots f'ing impossible to take off unless you have access to heavy duty demolition equipment?

Going back into the garage now to find something bigger to hit it with.

smashsmashsmashsmash


Cheers

Marty


crackedfinger

1,569 posts

258 months

Friday 9th April 2010
quotequote all
Steve heaths swirl tank top is ace.

clive f

7,259 posts

262 months

Friday 9th April 2010
quotequote all
crackedfinger said:
Steve heaths swirl tank top is ace.
I can just picture Steve in a tank top.hehe

spend

12,581 posts

280 months

Friday 9th April 2010
quotequote all
clive f said:
crackedfinger said:
Steve heaths swirl tank top is ace.
I can just picture Steve in a tank top.hehe
Thread title too much of a teaser for you to resist then Cliff? hehe


clive f

7,259 posts

262 months

Friday 9th April 2010
quotequote all
yes It had me all of a dither davehehe

BliarOut

72,863 posts

268 months

Friday 9th April 2010
quotequote all
A pickaxe is actually the perfect tool to remove the cap!

spend

12,581 posts

280 months

Friday 9th April 2010
quotequote all
BliarOut said:
A pickaxe is actually the perfect tool to remove the cap!
roflroflroflrofl
evilwink

BliarOut

72,863 posts

268 months

Friday 9th April 2010
quotequote all
No, you don't swing it, you just rest it in the cap and turn et voila, the cap comes undone easily biggrin

spend

12,581 posts

280 months

Friday 9th April 2010
quotequote all
Do you warm it up before approaching her? evilwhistlewhistlewhistle

BliarOut

72,863 posts

268 months

Friday 9th April 2010
quotequote all
Dutch cap? That's a 900-TR job, surely?

Marty V8

Original Poster:

578 posts

215 months

Saturday 10th April 2010
quotequote all
spend said:
BliarOut said:
A pickaxe is actually the perfect tool to remove the cap!
roflroflroflrofl
evilwink
Variation on a theme..

I ended up using a wrecking pry bar, edge on to loosen the bloody thing shoot

Now its, err, not so stiff. Hardly surprising at this time in the morning.

biggrinbiggrinbiggrinbiggrin

Thanks for the advice, and more importantly, for the humour.

Cheers

Marty

BliarOut

72,863 posts

268 months

Saturday 10th April 2010
quotequote all
See, it's not just me biggrin

Zumbruk

7,848 posts

289 months

Saturday 10th April 2010
quotequote all
BliarOut said:
See, it's not just me biggrin
No, it isn't. I now keep a small Stilson wrench in the TVR tool kit for removing the swirl pot cap. And, for that matter, the coolant expansion tank cap (aka radiator cap) since I can't get that undone with my bare hands, either.

grm500

158 posts

290 months

Saturday 10th April 2010
quotequote all
Two pence piece held in a pair of pliers for expansion tank once loosened the first time works for me. That way you can't over-tighten too.

Marty V8

Original Poster:

578 posts

215 months

Sunday 11th April 2010
quotequote all
So we have an axe, a wrecking bar and a monkey wrench. I think we've reached the pinnacle of Engineering finesse...rolleyeslaugh

And now to take the doors off. Where did I leave my chainsaw?biglaugh

BliarOut

72,863 posts

268 months

Sunday 11th April 2010
quotequote all
That's why the griff has a reputation as a man's car biggrin