s3 0z 8 spoke wheel centre caps
s3 0z 8 spoke wheel centre caps
Author
Discussion

aero340

Original Poster:

272 posts

241 months

Saturday 10th April 2010
quotequote all
looking to replace my wheel caps has anyone bought any of late which supplier did you use ££££ ? phoned TVR power non in stock looked on flee bay also ???thanks kev

Brendon NZ

144 posts

207 months

Saturday 10th April 2010
quotequote all
I bought some from TVR Power last November...they said that was nearly there last set, so they have probably run out.
I also bought some generic silver centre caps and some 50cm black and silver TVR silicon round centres off Fleabay. The silicon glues onto the silver centre caps and the caps fit well into the Oz 8 spokes....I actually have these on my car now and will post some pictures soon.
Brendon

aero340

Original Poster:

272 posts

241 months

Saturday 10th April 2010
quotequote all
thanks Brendon look forward to the photos kev.

Brendon NZ

144 posts

207 months

Monday 12th April 2010
quotequote all
Kev,
Below are some photos of the replacment wheel centres.
Again...both generic siver caps and then the TVR silicon domes are bought separately on Fleabay.
50cm domes are the ones I used...and they also come in different colours.
Brendon



aero340

Original Poster:

272 posts

241 months

Monday 12th April 2010
quotequote all
THANKS Brendon ,they look great i will check out fleabay and order aset thanks kev

TurboTony

908 posts

200 months

Tuesday 13th April 2010
quotequote all
This is good advice. Have you a link to the ebay seller for the plain silver cap - I'm struggling to find them on the bay.
Cheers
Tony

Brendon NZ

144 posts

207 months

Tuesday 13th April 2010
quotequote all
Here are links to the sellers of resin domes and caps.
Generic caps are 55mm....TVR domes are 50mm

http://shop.ebay.co.uk/zarasgreeneyes/m.html?_nkw=...

http://cgi.ebay.co.uk/55MM-UNIVERSAL-CENTRE-CAPS-V...

TurboTony

908 posts

200 months

Tuesday 13th April 2010
quotequote all
Brilliant! Thanks. I bought some of the domes a little while ago - now I've got a way of fixing them properly.

Cheers
Tony