I've gone and done it....
I've gone and done it....
Author
Discussion

S800VXR

Original Poster:

5,877 posts

231 months

Saturday 10th April 2010
quotequote all
Done a Mel and brought a new Meguires G220 DA polisher, different foam heads, multiple polishes and also some Dodo juice clay bars and lube spray.


All I need now is my car back! Going to have a practice on the Polo to get my eye in first.

:-)

Magic919

14,589 posts

232 months

Saturday 10th April 2010
quotequote all
DA is for girls. Should've got a rotary, like Mel's.

Bonnie and Clyde

11,701 posts

223 months

Saturday 10th April 2010
quotequote all
Nice one Roger Have fun and fill me in when you get a resultclap

Magic hehe clap

S800VXR

Original Poster:

5,877 posts

231 months

Saturday 10th April 2010
quotequote all
DA's are safer! might graduate to a rotary one day!

gsd2000

11,515 posts

214 months

Saturday 10th April 2010
quotequote all
Ive got an 110v porter cable da.

magic919 do you use a rotary?

Magic919

14,589 posts

232 months

Saturday 10th April 2010
quotequote all
I've got the Pprter Cable in a cupboard, but I use a Makita 9227 these days. Much less vibration and more effective.

gsd2000

11,515 posts

214 months

Saturday 10th April 2010
quotequote all
How hard is a rotary to use, i know it requires more care.

I did buy a cheap silverline but only played with it and found it very heavy. I know the makita's are alot lighter and more comfortable to use.

Magic919

14,589 posts

232 months

Saturday 10th April 2010
quotequote all
I've got a Silverline too. Rotary is fine for anyone with a brain. You quickly get used to it. It would take a silly pad and polish combo and some foolish handling to do damage. So much nicer to use for a large car. The amount of vibration the PC gives is really noticeable once you use the rotary for a while.

gsd2000

11,515 posts

214 months

Saturday 10th April 2010
quotequote all
Is the makita alot lighter than the silverline and can you feel a difference?

I may look into getting a rotary later in the year, the porter cable does vibrate a hell of alot.

Magic919

14,589 posts

232 months

Saturday 10th April 2010
quotequote all
To me the Makita feels a good weight and the Silverline (blue) feels a bit heavy. I think Mel got a lighter Sealey model and it was cheap too. Festool do a nice one. Light, but it'll make your wallet pretty light too.

nitrosman1

641 posts

226 months

Monday 12th April 2010
quotequote all
can anyone tell me what polishes people use im digging out my heavy silverline model (hope this doesnt make my tennis elbow worse) tomoz and im going to attack my white merc vito with it first get my eye in and all that, also does anyone know where abouts in bmouth /poole the detailing suppliers may be hiding exept of course halfrauds i try and avoid them if pos

the hitman001

14,343 posts

204 months

Monday 12th April 2010
quotequote all
nitrosman1 said:
can anyone tell me what polishes people use im digging out my heavy silverline model (hope this doesnt make my tennis elbow worse) tomoz and im going to attack my white merc vito with it first get my eye in and all that, also does anyone know where abouts in bmouth /poole the detailing suppliers may be hiding exept of course halfrauds i try and avoid them if pos
Mate it depends on the condition of your paint work to start with..... as to detailing suppliers I always use online like Chemical guy's or the ultimate finish etc...

Meguiars do a decent range as do menz or 3M really one of the best out there at the moment, It is all down to personal preference Autoglym do SRP but that tends to be really dusty and really only contains fillers that mask the swirls or light scratches.

Good luck on a Vito mate



Edited by the hitman001 on Monday 12th April 23:28

nitrosman1

641 posts

226 months

Monday 12th April 2010
quotequote all
cheers the paint is fairly patchy faded and scratched in certain areas tho im not looking for a mirror finish as it is a workhorse its just that im having it re sighn-written on thursday and want to get it more respectable

the hitman001

14,343 posts

204 months

Tuesday 13th April 2010
quotequote all
nitrosman1 said:
cheers the paint is fairly patchy faded and scratched in certain areas tho im not looking for a mirror finish as it is a workhorse its just that im having it re sighn-written on thursday and want to get it more respectable
Well IMO if you want the finish you require then go for the Auto glym SRP wil do you fine on that job

nitrosman1

641 posts

226 months

Tuesday 13th April 2010
quotequote all
the hitman001 said:
nitrosman1 said:
cheers the paint is fairly patchy faded and scratched in certain areas tho im not looking for a mirror finish as it is a workhorse its just that im having it re sighn-written on thursday and want to get it more respectable


Well IMO if you want the finish you require then go for the Auto glym SRP wil do you fine on that job
cheers im shopping for auto glym then

the hitman001

14,343 posts

204 months

Tuesday 13th April 2010
quotequote all
nitrosman1 said:
the hitman001 said:
nitrosman1 said:
cheers the paint is fairly patchy faded and scratched in certain areas tho im not looking for a mirror finish as it is a workhorse its just that im having it re sighn-written on thursday and want to get it more respectable
Well IMO if you want the finish you require then go for the Auto glym SRP wil do you fine on that job
cheers im shopping for auto glym then
Ok but remember less is more (if you know what I mean)

nitrosman1

641 posts

226 months

Tuesday 13th April 2010
quotequote all
my plan of attack is 1. good wash 2. clay with water 3. tape up trims etc 4. auto glym and mop with on a fairly slow speed i was told the trick is to keep it wet not letting the mop head dry out
thanks for answering all my stupid questions btw

the hitman001

14,343 posts

204 months

Tuesday 13th April 2010
quotequote all
nitrosman1 said:
my plan of attack is 1. good wash 2. clay with water 3. tape up trims etc 4. auto glym and mop with on a fairly slow speed i was told the trick is to keep it wet not letting the mop head dry out
thanks for answering all my stupid questions btw
Good plan

you must always prime the the pad on the DA or Rotary due to the heat that is produced I always use on of my quick detailing sprays.

What lube are you planing on for the clay bar?

As said do not put 2 much SRP on if you get white fall put dust then you have used to much,

gsd2000

11,515 posts

214 months

Tuesday 13th April 2010
quotequote all
Maybe he is using bilt hamber clay

the hitman001

14,343 posts

204 months

Tuesday 13th April 2010
quotequote all
gsd2000 said:
Maybe he is using bilt hamber clay
Good clay bar that