Sticky steering into slight RH corners
Sticky steering into slight RH corners
Author
Discussion

ruaricoles

Original Poster:

1,240 posts

254 months

Sunday 11th April 2010
quotequote all
Out in the Griff this afternoon and noticed there's a stiff point just off straight ahead as you turn into RH corners. Feels like it's stuck in a longitudinal rut on a motorway, which you have to apply additional pressure to overcome.

It's a non-PAS 1994 500, 15" Toyo T1Rs at 24psi, no play in the system that I can detect, recently greased rack (doesn't appear to have lost grease) and a year or so ago it got new Protech dampers and front lower bushes.

If you're turning right from a LH turn (eg. turning left then right on entering a roundabout) you can't detect anything is wrong; it's only when you start a gentle turn from straight ahead.

I'll jack it up and have a good look around but if anyone has any specific suggestions it would be great.

Ta

Ruari

Ant.

5,254 posts

310 months

Sunday 11th April 2010
quotequote all
Check the UJ's in the rods between the column and the rack.

rigga

8,806 posts

230 months

Monday 12th April 2010
quotequote all
Ant. said:
Check the UJ's in the rods between the column and the rack.
This is a very good place to start.

ruaricoles

Original Poster:

1,240 posts

254 months

Monday 3rd May 2010
quotequote all
Well.... I never got round to investigating further, but used the car again yesterday and today and the sticky steering has fixed itself. smile That'll teach me for not using it often enough.

Thanks for the UJ suggestions - will have a look at them next time I'm tinkering with it anyway.

Ruari