122 S/C bearings
Author
Discussion

007 VXR

Original Poster:

64,187 posts

218 months

Wednesday 14th April 2010
quotequote all
i have a 122 S/C running at 9psi on my ro , with worn bearings
would i be getting less power because of this ??

car felt slower today and did not seam to pull as hard as normal

after_shock

8,751 posts

251 months

Wednesday 14th April 2010
quotequote all
When you say bearings do you mean inside the charger itself?

007 VXR

Original Poster:

64,187 posts

218 months

Wednesday 14th April 2010
quotequote all
after_shock said:
When you say bearings do you mean inside the charger itself?
yes booked in at the fish 20th may to have them replaced..
making funny noise when you lift off with the right foot frown
bit like a whistle scratchchin

will also have s/c belt changed at the same time

monkfish1

12,516 posts

255 months

Wednesday 14th April 2010
quotequote all
007 VXR said:
i have a 122 S/C running at 9psi on my ro , with worn bearings
would i be getting less power because of this ??

car felt slower today and did not seam to pull as hard as normal


Wont make any difference.

007 VXR

Original Poster:

64,187 posts

218 months

Wednesday 14th April 2010
quotequote all
monkfish1 said:
007 VXR said:
i have a 122 S/C running at 9psi on my ro , with worn bearings
would i be getting less power because of this ??

car felt slower today and did not seam to pull as hard as normal
Wont make any difference.
must just be me then scratchchin

rest of the car sounds fine

thanks roger smile would have called tomorrow to ask
but was just sitting here worrying (as i do) paperbag

nice to know your there thumbup

monkfish1

12,516 posts

255 months

Wednesday 14th April 2010
quotequote all
007 VXR said:


thanks roger would have called tomorrow to ask
but was just sitting here worrying (as i do) paperbag

nice to know your there thumbup


007 VXR

Original Poster:

64,187 posts

218 months

Wednesday 14th April 2010
quotequote all
monkfish1 said:
007 VXR said:
thanks roger smile would have called tomorrow to ask
but was just sitting here worrying (as i do) paperbag

nice to know your there thumbup
rofl







getmecoat

S800VXR

5,877 posts

231 months

Wednesday 14th April 2010
quotequote all
I've always wondered about the bearings. I assume they are sealed plain bearings - ie not oil fed. Are they difficult or expensive to have replaced...?

007 VXR

Original Poster:

64,187 posts

218 months

Wednesday 14th April 2010
quotequote all
S800VXR said:
I've always wondered about the bearings. I assume they are sealed plain bearings - ie not oil fed. Are they difficult or expensive to have replaced...?
looking at about 300 ish fitted smile dont know about the tech bit getmecoat

S800VXR

5,877 posts

231 months

Wednesday 14th April 2010
quotequote all
007 VXR said:
S800VXR said:
I've always wondered about the bearings. I assume they are sealed plain bearings - ie not oil fed. Are they difficult or expensive to have replaced...?
looking at about 300 ish fitted smile dont know about the tech bit getmecoat
Thats not to bad TBH.

007 VXR

Original Poster:

64,187 posts

218 months

Wednesday 14th April 2010
quotequote all
S800VXR said:
007 VXR said:
S800VXR said:
I've always wondered about the bearings. I assume they are sealed plain bearings - ie not oil fed. Are they difficult or expensive to have replaced...?
looking at about 300 ish fitted smile dont know about the tech bit getmecoat
Thats not to bad TBH.
i was very worryed for a min ,when roger told me it was the s/c bearings yikes

but very please when he told me the price biggrin

after_shock

8,751 posts

251 months

Wednesday 14th April 2010
quotequote all
Must admit a curiosity as to where they are in the charger and do the chargers simply unbolt revealing whats inside? (not that im going to try!!)

ringram

14,702 posts

279 months

Wednesday 14th April 2010
quotequote all
007 VXR said:
car felt slower today and did not seam to pull as hard as normal
You sure its not the summer weather or more heatsoak?

monkfish1

12,516 posts

255 months

Wednesday 14th April 2010
quotequote all
The bearing in question are the 4 on the driveshaft that runs through the manifold, not the actual supercharger itself. Never seen a failed supercharger unit yet, doubt i ever will.

007 VXR

Original Poster:

64,187 posts

218 months

Wednesday 14th April 2010
quotequote all
ringram said:
007 VXR said:
car felt slower today and did not seam to pull as hard as normal
You sure its not the summer weather or more heatsoak?
tongue outhehe

S800VXR

5,877 posts

231 months

Wednesday 14th April 2010
quotequote all
monkfish1 said:
The bearing in question are the 4 on the driveshaft that runs through the manifold, not the actual supercharger itself. Never seen a failed supercharger unit yet, doubt i ever will.
Ah! smile

007 VXR

Original Poster:

64,187 posts

218 months

Wednesday 14th April 2010
quotequote all
monkfish1 said:
The bearing in question are the 4 on the driveshaft that runs through the manifold, not the actual supercharger itself. Never seen a failed supercharger unit yet, doubt i ever will.
sorry getmecoat

this is why i go to the fish

i know nothing .. even when told paperbag

stigmundfreud

22,454 posts

241 months

Thursday 15th April 2010
quotequote all
what was that clanking sound the other week? I know it wasnt my wallet being opened as I didnt take it

007 VXR

Original Poster:

64,187 posts

218 months

Thursday 15th April 2010
quotequote all
stigmundfreud said:
what was that clanking sound the other week? I know it wasnt my wallet being opened as I didnt take it
if we listen to mel ... you never open your wallet rofl
tongue out

MyM8V8

9,468 posts

226 months

Thursday 15th April 2010
quotequote all
monkfish1 said:
The bearing in question are the 4 on the driveshaft that runs through the manifold, not the actual supercharger itself. Never seen a failed supercharger unit yet, doubt i ever will.
What are the bearings suspending the rotors then? Professional interest.

"..............doubt i ever will" Now you've done it!