Clutch fluid
Author
Discussion

maxmc2

Original Poster:

2,063 posts

216 months

Friday 16th April 2010
quotequote all
Should it really be this bad inside the resivoir?


S800VXR

5,877 posts

231 months

Friday 16th April 2010
quotequote all
That is bad - but the subject has been discussed to death TBH.

ringram

14,702 posts

279 months

Friday 16th April 2010
quotequote all
Looks like mine did smile

the_ferret82

25,627 posts

215 months

Friday 16th April 2010
quotequote all
looks like mine.

stevieturbo

18,105 posts

278 months

Friday 16th April 2010
quotequote all
That's very bad !!!

Dont know why...but mine has never been as bad as that. How many miles or years of use is that ?

maxmc2

Original Poster:

2,063 posts

216 months

Friday 16th April 2010
quotequote all
Sorry guys hasnt been changed since i had it, 38K miles 05

Ive now spent the last hour replacing the fluid as in previous threads managed to find a link and now the clutch feels like new

Sorry for the duplicate post frown

snowwolf

11,503 posts

206 months

Friday 16th April 2010
quotequote all
I have changed mine every 1000 miles which is about once a month and it normally turned from fresh new oil to dirty black in that time.

SimonV8ster

13,035 posts

259 months

Saturday 17th April 2010
quotequote all
Should be changed every other year acording to the service schedule.

snowwolf

11,503 posts

206 months

Sunday 18th April 2010
quotequote all
This is after a months driving about 800 miles


snowwolf

11,503 posts

206 months

Sunday 18th April 2010
quotequote all
snowwolf said:
This is after a months driving about 800 miles

People say that changing just the reservoir fluid, does nothing as your only changing the bit of oil in the reservoir, but after 800 miles mine is always black and I must have changed it at least six times now, all I can think is the clutch dust somehow gets into the oil, don't ask me how, perhaps the dust gets on the exposed piston rod and travels past the seal as you depress the clutch as the seal chevron is pointing towards the pressure side allowing an easy route passed the seal.

It takes five mins to change so just do it when I check the enging oil, syringe it out, wipe out with tissue and fill back up.

boggie

393 posts

253 months

Sunday 18th April 2010
quotequote all
Mine was getting as bad as yours but I have used a pipette three times to empty the resevior and replaced it with fresh fluid (thanks for the idea John). Looking pretty clean now. :-)