Tyre size advice please
Discussion
vxr8mate said:
Hi all need some advice. I replaced my rear tyres with 285/35/19’s and now need to replace the front ones.
Therefore should I stick with the stock size being 245/40’s or can I go 245/ 35 on the front also?
You could, but altering the aspect ratio (depth of the tyre in relationship to its width ) will mean a smaller circumferance/diameter and the car would sit slightly lower at that end.(More chassis rake).Therefore should I stick with the stock size being 245/40’s or can I go 245/ 35 on the front also?
I'd stick with stock.
You've increased the rolling radius at the rear, and now want to decrease it at the front? A smaller rolling radius on one axle only can cause problems with the ABS & TC on some cars. I don't know if it's the case on VXR8s, but I'd rather not pay for the tyres only to find out I have to change them again straight away.
vxr8mate said:
After checking the order for my rear's it seems they were 285/30's and not 35's as previously thought.
I know a few of the guys here are running those dimensions on their rears with no problems but does that mean I go lower on the front or stay as they are?
i run 285 30 19 on rears of my ro I know a few of the guys here are running those dimensions on their rears with no problems but does that mean I go lower on the front or stay as they are?
but 245 35 19 on front
007 VXR said:
vxr8mate said:
After checking the order for my rear's it seems they were 285/30's and not 35's as previously thought.
I know a few of the guys here are running those dimensions on their rears with no problems but does that mean I go lower on the front or stay as they are?
I know a few of the guys here are running those dimensions on their rears with no problems but does that mean I go lower on the front or stay as they are?
i run 285 30 19 on rears of my ro
but 245 35 19 on front
That's the size I was thinking of.
No problems with that set up I take it?
vxr8mate said:
007 VXR said:
vxr8mate said:
After checking the order for my rear's it seems they were 285/30's and not 35's as previously thought.
I know a few of the guys here are running those dimensions on their rears with no problems but does that mean I go lower on the front or stay as they are?
i run 285 30 19 on rears of my ro I know a few of the guys here are running those dimensions on their rears with no problems but does that mean I go lower on the front or stay as they are?
but 245 35 19 on front
No problems with that set up I take it?
this is the set up done by the fish and recommended by lots on here
007 VXR said:
vxr8mate said:
After checking the order for my rear's it seems they were 285/30's and not 35's as previously thought.
I know a few of the guys here are running those dimensions on their rears with no problems but does that mean I go lower on the front or stay as they are?
I know a few of the guys here are running those dimensions on their rears with no problems but does that mean I go lower on the front or stay as they are?
i run 285 30 19 on rears of my ro
but 245 35 19 on front
Interesting. Can I ask what rim widths you have please?
boggie said:
007 VXR said:
vxr8mate said:
After checking the order for my rear's it seems they were 285/30's and not 35's as previously thought.
I know a few of the guys here are running those dimensions on their rears with no problems but does that mean I go lower on the front or stay as they are?
i run 285 30 19 on rears of my ro I know a few of the guys here are running those dimensions on their rears with no problems but does that mean I go lower on the front or stay as they are?
but 245 35 19 on front
Gassing Station | HSV & Monaro | Top of Page | What's New | My Stuff


