Discussion
S800VXR said:
Whats the full wheel spec for the 19" R8 wheels as a mate has a set of BBS LM replicas for sale (cheap but brand spankers) which I think may fit the R8's... Think the back ones from his set are 10"x19 with a 22offset..., front being 8.5" with a 35offset...
No chance Roger. Rears are 57mm offset, fronts 48, though 35 will fit.
monkfish1 said:
S800VXR said:
Whats the full wheel spec for the 19" R8 wheels as a mate has a set of BBS LM replicas for sale (cheap but brand spankers) which I think may fit the R8's... Think the back ones from his set are 10"x19 with a 22offset..., front being 8.5" with a 35offset...
No chance Roger. Rears are 57mm offset, fronts 48, though 35 will fit.LR Disco style?
Trailermasher said:
monkfish1 said:
S800VXR said:
Whats the full wheel spec for the 19" R8 wheels as a mate has a set of BBS LM replicas for sale (cheap but brand spankers) which I think may fit the R8's... Think the back ones from his set are 10"x19 with a 22offset..., front being 8.5" with a 35offset...
No chance Roger. Rears are 57mm offset, fronts 48, though 35 will fit.LR Disco style?
ARAF said:
Trailermasher said:
monkfish1 said:
S800VXR said:
Whats the full wheel spec for the 19" R8 wheels as a mate has a set of BBS LM replicas for sale (cheap but brand spankers) which I think may fit the R8's... Think the back ones from his set are 10"x19 with a 22offset..., front being 8.5" with a 35offset...
No chance Roger. Rears are 57mm offset, fronts 48, though 35 will fit.LR Disco style?
Excuse me as the Florida suns getting to me.... however, thinking about this, I currently have 10" with a 45 offset soooooo, surely a 57offset on a 9.5" rim would be the same since Im taking 12.7mm off the width but adding 12mm to the offset so it should compensate...? Remember I have no lip on the rear and the edge is probably pushed out a few mm as well.
I assume also that the 20" VXR8 stock whels are 9.5 width on the rear with a 57mm offset?
I assume also that the 20" VXR8 stock whels are 9.5 width on the rear with a 57mm offset?
S800VXR said:
Excuse me as the Florida suns getting to me.... however, thinking about this, I currently have 10" with a 45 offset soooooo, surely a 57offset on a 9.5" rim would be the same since Im taking 12.7mm off the width but adding 12mm to the offset so it should compensate...? Remember I have no lip on the rear and the edge is probably pushed out a few mm as well.
I assume also that the 20" VXR8 stock whels are 9.5 width on the rear with a 57mm offset?
You'd be taking the wheel inboard due to the offset change. Then taking the outer rim in a bit more as the wheel is less wide. So it's about 12mm plus 1/2 of 12.5. But bear in mind you'll be about 5mm closer to the suspension on the inboard side of the rim.I assume also that the 20" VXR8 stock whels are 9.5 width on the rear with a 57mm offset?
Magic919 said:
S800VXR said:
Excuse me as the Florida suns getting to me.... however, thinking about this, I currently have 10" with a 45 offset soooooo, surely a 57offset on a 9.5" rim would be the same since Im taking 12.7mm off the width but adding 12mm to the offset so it should compensate...? Remember I have no lip on the rear and the edge is probably pushed out a few mm as well.
I assume also that the 20" VXR8 stock whels are 9.5 width on the rear with a 57mm offset?
You'd be taking the wheel inboard due to the offset change. Then taking the outer rim in a bit more as the wheel is less wide. So it's about 12mm plus 1/2 of 12.5. But bear in mind you'll be about 5mm closer to the suspension on the inboard side of the rim.I assume also that the 20" VXR8 stock whels are 9.5 width on the rear with a 57mm offset?
Gassing Station | HSV & Monaro | Top of Page | What's New | My Stuff


