Rear Brake setups - small!
Discussion
jhinchy said:
Did i not tell you that the other day? thats why i bought the cv8 rims, to clear the calipers. I fitted some AP's, made a massive difference.
no nice one are the old calipers clean as i wouldnt mind a second set if no one wants them first
Edited by drew ss on Tuesday 20th April 22:10
I have a set of std CV8 rear discs and calipers, these allow me to fit the 15” wheels on.
Even then there is very little clearance between the Banjo bolt on the caliper and the rim. I also have to point the flexi pipe inboard or the point where the metal is pressed onto the rubber flexi rubs on the inside of the Rim.
It takes about 1 hour a side to swap the CV8 discs with the APs and bleed the brakes.
Even then there is very little clearance between the Banjo bolt on the caliper and the rim. I also have to point the flexi pipe inboard or the point where the metal is pressed onto the rubber flexi rubs on the inside of the Rim.
It takes about 1 hour a side to swap the CV8 discs with the APs and bleed the brakes.
Gassing Station | HSV & Monaro | Top of Page | What's New | My Stuff



