Can anyone near me help?
Discussion
My wing mirrors are annoying me.
They vibrate. The left hand one is worst. It vibrates and moves. So half way through a journey I am looking at the sky.
I've tried taking the mirror out as instructed in the manual to do the mod - but I can't get the damn thing out.
Has anyone in Surrey or SW London done it before? I don't suppose anyone could help me do it this weekend? Maybe Sat?
Happy to drive over to see you etc. Any help gratefully accepted!
Happy to buy you
in return.
They vibrate. The left hand one is worst. It vibrates and moves. So half way through a journey I am looking at the sky.
I've tried taking the mirror out as instructed in the manual to do the mod - but I can't get the damn thing out.
Has anyone in Surrey or SW London done it before? I don't suppose anyone could help me do it this weekend? Maybe Sat?
Happy to drive over to see you etc. Any help gratefully accepted!
Happy to buy you
in return.SimonJW said:
Can you not fix this from the inside with a modification to the mirror 'joystick' e.g. jam a piece of wood or plastic in the internal mechanism under the rubber boot/gaiter. A lot less chance of breaking the mirror glass. I think this is how Bondy tried sorting it out?
Simon
Yep that how i did it. :-)Simon
Wow thanks for all the feedback and offers.
Have any of you done what I am attempting to do?
Apparently it is quite easy, but obviously I am doing something wrong. I am sure it is only a 30min job for someone that has done it before.
I'll take a look at doing the mini rubber fix - does it work well? Though I prefer to take the mirror off.
Have any of you done what I am attempting to do?
Apparently it is quite easy, but obviously I am doing something wrong. I am sure it is only a 30min job for someone that has done it before.
I'll take a look at doing the mini rubber fix - does it work well? Though I prefer to take the mirror off.
hoyin said:
Wow thanks for all the feedback and offers.
Have any of you done what I am attempting to do?
Apparently it is quite easy, but obviously I am doing something wrong. I am sure it is only a 30min job for someone that has done it before.
I'll take a look at doing the mini rubber fix - does it work well? Though I prefer to take the mirror off.
Presume you have seen the detailed instructions and pictures on Noble Parts - worked a treat for me.Have any of you done what I am attempting to do?
Apparently it is quite easy, but obviously I am doing something wrong. I am sure it is only a 30min job for someone that has done it before.
I'll take a look at doing the mini rubber fix - does it work well? Though I prefer to take the mirror off.
david.mt said:
Presume you have seen the detailed instructions and pictures on Noble Parts - worked a treat for me.
Yes ... I just can't get the mirror to pop out! Is there a special trick I need to use? Or do I need to try harder?I move the mirror as much as I can with a screwdriver but it just does not pop out.
hoyin said:
david.mt said:
Presume you have seen the detailed instructions and pictures on Noble Parts - worked a treat for me.
Yes ... I just can't get the mirror to pop out! Is there a special trick I need to use? Or do I need to try harder?I move the mirror as much as I can with a screwdriver but it just does not pop out.
I found that if you try and hold the mirror in a flat position before applying the force rather than letting the mirror tilt in or out was easier if you kind of understand what I am trying to say - you are welcome to come by York and I will take them off

OK so I tried again over the weekend.
I pushed it flat with one hand and used a screw driver the other to push it out of the clip.
But the mirro goes all the way over till it hits the mirror housing and still it does not come off!
I cannot push it any further.
Any ideas? Otherwise I am going to have to trouble someone who has done it this weekend!
I pushed it flat with one hand and used a screw driver the other to push it out of the clip.
But the mirro goes all the way over till it hits the mirror housing and still it does not come off!
I cannot push it any further.
Any ideas? Otherwise I am going to have to trouble someone who has done it this weekend!
hoyin said:
OK so I tried again over the weekend.
I pushed it flat with one hand and used a screw driver the other to push it out of the clip.
But the mirro goes all the way over till it hits the mirror housing and still it does not come off!
I cannot push it any further.
Any ideas? Otherwise I am going to have to trouble someone who has done it this weekend!
insert finger under one edge, insert screwdriver under other edge now pull screwdriver towards you whilst stopping the mirror going inwards with ur finger and it pops out GL I pushed it flat with one hand and used a screw driver the other to push it out of the clip.
But the mirro goes all the way over till it hits the mirror housing and still it does not come off!
I cannot push it any further.
Any ideas? Otherwise I am going to have to trouble someone who has done it this weekend!
yeah!
Managed to do it!
I needed two screwdrivers though.
Insert one to push it. Insert the other to actually push the back plate away from the mirror front.
The plastic had a lot of flex in it so pushing from one side did not manage to do it as the back moved with the mirror front.
Once off stick some tape to the green flap to increase its thickness slightly so there is better grip. Reinstall and voila - no more vibrating mirrors!
So happy!
Managed to do it!
I needed two screwdrivers though.
Insert one to push it. Insert the other to actually push the back plate away from the mirror front.
The plastic had a lot of flex in it so pushing from one side did not manage to do it as the back moved with the mirror front.
Once off stick some tape to the green flap to increase its thickness slightly so there is better grip. Reinstall and voila - no more vibrating mirrors!
So happy!
There's a section in the Noble assembly manual last chapter that discusses how to fix the loose mirrors by pulling the mirror off and putting a piece of electrical tape around the adjuster bar so that it is thicker and offers more resistance, however, I noticed that eventhough my car came with that mod, my passenger side mirror still did not maintain the angle I set so I put a rubber piece behind the mirror to hold it in the right spot for me and it has been perfect ever since LOL
If you need the the chapter on the mirror let me know and I'll email it to you, it has step ny step instructions with pics
If you need the the chapter on the mirror let me know and I'll email it to you, it has step ny step instructions with pics
Gassing Station | Noble | Top of Page | What's New | My Stuff


