Reading Fault Codes
Reading Fault Codes
Author
Discussion

LC860G

Original Poster:

615 posts

234 months

Saturday 24th April 2010
quotequote all
Hi

A quick question. What is the cheapest/easiest way to read the stored fault codes on a VXR8?

I know that you can go down the EFILive type route but I'm not really planning on doing anything on the tuning front, so I want something cheap and cheerful - either laptop software or a handheld device like EFILive, that will let me identify and (possibly) clear the fault codes.

Does anyone have any recommendations?

Thanks

Phil

rich24v

352 posts

240 months

Saturday 24th April 2010
quotequote all
Probably any OBDII scanner should read codes at least.
I have a cheap scanner D900 CAN OBDII which I just plugged in,
seems to read most of the pids ok, even told me the vin number
which matched Try it out later today.....
Hundreds of them on ebay.

LC860G

Original Poster:

615 posts

234 months

Saturday 24th April 2010
quotequote all
Thanks - sounds like a plan.

See you later

ringram

14,702 posts

279 months

Saturday 24th April 2010
quotequote all
The efilive scan tool is under £300 but Im sure as mentioned you can find something cheaper.
It will read, reset and also decode the DTC codes. So you dont need a laptop or go hunting online for what a P0102 means.
The nice thing is it will read all the codes including any Holden specific stuff.
Of course you can upgrade it later if you want to for full tuning function smile

drew ss

2,683 posts

215 months

Saturday 24th April 2010
quotequote all
ringram said:
The efilive scan tool is under £300 but Im sure as mentioned you can find something cheaper.
It will read, reset and also decode the DTC codes. So you dont need a laptop or go hunting online for what a P0102 means.
The nice thing is it will read all the codes including any Holden specific stuff.
Of course you can upgrade it later if you want to for full tuning function


Do u do lay-by rich

MyM8V8

9,468 posts

226 months

Sunday 25th April 2010
quotequote all
drew ss said:
ringram said:
The efilive scan tool is under £300 but Im sure as mentioned you can find something cheaper.
It will read, reset and also decode the DTC codes. So you dont need a laptop or go hunting online for what a P0102 means.
The nice thing is it will read all the codes including any Holden specific stuff.
Of course you can upgrade it later if you want to for full tuning function smile
Do u do lay-by rich biggrin
They don't do that over here Andy, it's called a Christmas club Mate.

doleboy

747 posts

248 months

Sunday 25th April 2010
quotequote all
MyM8V8 said:
drew ss said:
ringram said:
The efilive scan tool is under £300 but Im sure as mentioned you can find something cheaper.
It will read, reset and also decode the DTC codes. So you dont need a laptop or go hunting online for what a P0102 means.
The nice thing is it will read all the codes including any Holden specific stuff.
Of course you can upgrade it later if you want to for full tuning function


Do u do lay-by rich


They don't do that over here Andy, it's called a Christmas club Mate.


Thanks for clearing that up Gareth. I was a bit worried.

As far as I can tell there may not be an international standard for what occurs in lay-bys

Trailermasher

730 posts

253 months

Sunday 25th April 2010
quotequote all
drew ss said:
ringram said:
The efilive scan tool is under £300 but Im sure as mentioned you can find something cheaper.
It will read, reset and also decode the DTC codes. So you dont need a laptop or go hunting online for what a P0102 means.
The nice thing is it will read all the codes including any Holden specific stuff.
Of course you can upgrade it later if you want to for full tuning function smile
Do u do lay-by rich biggrin
Is that meeting place for payment-in-kind? hehe

wink

ringram

14,702 posts

279 months

Sunday 25th April 2010
quotequote all
drew ss said:
ringram said:
The efilive scan tool is under £300 but Im sure as mentioned you can find something cheaper.
It will read, reset and also decode the DTC codes. So you dont need a laptop or go hunting online for what a P0102 means.
The nice thing is it will read all the codes including any Holden specific stuff.
Of course you can upgrade it later if you want to for full tuning function smile
Do u do lay-by rich biggrin
Of course smile

drew ss

2,683 posts

215 months

Sunday 25th April 2010
quotequote all
ringram said:
drew ss said:
ringram said:
The efilive scan tool is under £300 but Im sure as mentioned you can find something cheaper.
It will read, reset and also decode the DTC codes. So you dont need a laptop or go hunting online for what a P0102 means.
The nice thing is it will read all the codes including any Holden specific stuff.
Of course you can upgrade it later if you want to for full tuning function


Do u do lay-by rich


Of course


just as i thought good man rich....is it hard to use the efi live i mean

Edited by drew ss on Sunday 25th April 19:53

ringram

14,702 posts

279 months

Sunday 25th April 2010
quotequote all
The initial curve is steep depending on what you want to do with it.
Things like changing max road speed or rpm etc are easy.
Optimising spark timing is a little harder and needs a dyno for proper measurement etc.
Tweaking an existing tune is easy as you can always go back from whence you came.
Building a tune from scratch is harder. A guy Jessie in the US builds tunes from totally blank tables. Madness.
But Stig and Madmax have done their cars. Gareth also uses it. Plus quite a few others around with Corvette's, camaro's etc.
When I first got one myself I thought it was the best tool/toy you could get for the car.

I dont think anyone has beaten any of my dyno results with similar mods yet. So the results you can get can easily surpass and professional tunes. Mainly because you can spend as much as you like to eek every last bit out. Obviously protune guys have limited time as they need to pay the bills etc.