Cigar lighter not working ? Help
Cigar lighter not working ? Help
Author
Discussion

phib

Original Poster:

4,520 posts

288 months

Saturday 24th April 2010
quotequote all
So I have just returned to the fold after a 10 year gap !!

I have bought a Griffith 500 to keep that had a few little issues radio not working ( took plug out put back in now all works) and a couple of other really minor issues I have sorted.

However the one thing I cant sort is the cigar lighter ( the horn works si its not the fuse in theory) so how can I get it out I assume its a door card off job ( which I cant see how to do either !!)

Any help greatfully recieved

Phib

Torquemada

621 posts

302 months

Saturday 24th April 2010
quotequote all
Might be a dumb question, but are you sure it's not working? Mine will light a cigar (as if i ever felt the need), but for some reason will not power my tyre inflator.
Assume it's something to do with the current draw.

Colin RedGriff

2,541 posts

286 months

Ozstyle

392 posts

252 months

Sunday 25th April 2010
quotequote all
I had the same problem with the cigar lighter not working although there was 12V to it.
It was just surface corrosion of the internal parts (screw in copper insert and steel body). Fixed by removing cigar lighter from the arm rest, stripping it down and cleaning up the internals.

phib

Original Poster:

4,520 posts

288 months

Sunday 25th April 2010
quotequote all
How did you get it out ?

Phib

BliarOut

72,863 posts

268 months

Sunday 25th April 2010
quotequote all
See that door speaker... biggrin

phib

Original Poster:

4,520 posts

288 months

Sunday 25th April 2010
quotequote all
BliarOut said:
See that door speaker... biggrin
Yes !!! Had that out cant seem to get to it do you have to take the door card off ?

I seriously hope not !!

Phib

Edited by phib on Sunday 25th April 18:12

yellowgriff

1,429 posts

211 months

Sunday 25th April 2010
quotequote all
Took the door panel off mine 3 or 4 weeks ago took about 15 minutes. why not pull it off and check for live feed at base of lighter unit, could be broken wire in door shut,,,

Ozstyle

392 posts

252 months

Monday 26th April 2010
quotequote all
yes you have to take the door card off to remove the lighter

phib

Original Poster:

4,520 posts

288 months

Monday 26th April 2010
quotequote all
I have the panel off and I seem to have two feeds one solid red (unconnected at the moment) and one red / white connected.

When I connect the solid red one I get a permanent feed 12v and the cig lighter works, when I attach the red / white one I get about 4amps only when the car is switched on.

Are there any issues with attaching the 12v permanently ?

Thanks
Phib

BliarOut

72,863 posts

268 months

Tuesday 27th April 2010
quotequote all
They are usually permenantly live so you can use accessories and charge it with the ignition off.