Changing speedo readings
Discussion
I have a 54 plate Megane Scenic and the digital speedo reads in MPH. But next month the car is off to France and was wondering if there is some way to convert it to read in KPH? I've had a gander in the owners manual and can't see anything about it in there. Oh and I know that 60MPH is roughly 100KM/H but doing sums on the move isn't really an option.
The only thing I can think of is to either use the satnav which only displays the speed in a very small figure. I put it to the PH masses to help me in my dilema.
The only thing I can think of is to either use the satnav which only displays the speed in a very small figure. I put it to the PH masses to help me in my dilema.
- first set the display to the mileage / trip readings
- press and hold the trip reset button
- keeping the trip button pressed, start the car
- miles will flash for about 5s then change to km
- keep holding the trip reset button for 5s till the display stops flashing
- release the button - all done!
- same procedure to change back to miles
- press and hold the trip reset button
- keeping the trip button pressed, start the car
- miles will flash for about 5s then change to km
- keep holding the trip reset button for 5s till the display stops flashing
- release the button - all done!
- same procedure to change back to miles
Gassing Station | General Gassing [Archive] | Top of Page | What's New | My Stuff





