Discussion
Not Monaro related but thought i would post here as when i post in the VW forum i have to wait a week for a reply.
My golfs exhaust has fallen off. Im not prepared to pay £200 for a new one as the car only cost me £50, so im going to fit one myself
My question is how will i remove the piece of pipe attached to the cat as i think it will probably not move, would heating it up help me??
Thanks guys
My golfs exhaust has fallen off. Im not prepared to pay £200 for a new one as the car only cost me £50, so im going to fit one myself
My question is how will i remove the piece of pipe attached to the cat as i think it will probably not move, would heating it up help me??
Thanks guys

Edited by maxmc2 on Monday 26th April 11:18
rich24v said:
If it's a slide fit over the pipe coming from the cat, slit along
it's length where it slides over with a angle grinder being careful
not to go into the tube inside, it should then split open of it's own accord
enough to slide it off.....
it's length where it slides over with a angle grinder being careful
not to go into the tube inside, it should then split open of it's own accord
enough to slide it off.....
Ditto on that.
Slide overs are usualy packed with a bit of firegum for a perfect seal. with a bit of heat and rust these can lock solid as it twists slightly and both tubes are nolonger a perfect circle.
elongating the slits and using a large flatblade to pry it a bit wider will let it come of with ease.
Gassing Station | HSV & Monaro | Top of Page | What's New | My Stuff



