Chrome Instrument Bezels ?

[lancia4wd]

Hi,

Seen some on a car, anybody know where I can get some ?

Done a search and nothing pops up on the Internet

Regards


Nick

[rev-erend]

Karl Cordwell had a few sets made up. I doubt that he has any more. Think he was the North Yorkshire RO at some point.

Here is his email address : [e-mail]

Edited by rev-erend on Monday 26th April 15:19

[Gandalf]

I have a set fitted to the 450 but as Rev says I think Karl has given up producing them.

My only suggestion would be to try some of the American Boat Instrument manufacturers such as Livorsi or Gaffrig
http://www.gaffrigperformance.com/Products/accesso...

No idea if they will have something to fit but they do a wide range of colours and sizes.

Hope that helps

[lancia4wd]

Thanks Guys, i will give them a go.

[TVRleigh_BBWR]

He gave up making them a long time ago, they was ali not chrome. I bought his last set a few years back. I tired to find some general ones without a lot of luck.
I was speaking to a guy with a S, who wants some, for his S.
So was thinking now I have a workshop and Lathe, I may try and make some, so watch this space.

[SEvans]

Maybe worth a call to Speedy Cables. As they refurb clocks etc I suspect they may have some on the shelf. Cheers Steve

[RMeier]

Got mine from RT racing (Richard Thorpe)

[rev-erend]

RMeier said:

Got mine from RT racing (Richard Thorpe)

How recent was that Bob ?

[mrcrappy]

I tried to get some of those, Think Richard got them from Karl and as far as im aware both have stopped making/stocking them because of the cost, my cheap fix was to take each clock out of the dash and file the hole out of the veneer so I could fit the clock on the outside, did the same with the center console too.
Heres the link for a thread on the subject from a while back -
http://www.pistonheads.com/gassing/topic.asp?h=0&a...

Heres my dash if you want the cheap alternative

[Trickie Dickie]

Karl was the one who had them produced and I have had 2 sets from him
for my 350i then for my current 400SE

He was joint RO for West Yorkshire TVRCC (before me)

I will have a word and see where he got them done
and see if it is worth getting some more produced

Cheers
Richard

PS I am sure that email address for Karl is wrong Alan

[TvR Driver]

Hi Guys

If Anyone finds any or starts to make them please add me to the list

Thank you