Discussion
I've used a local one to me - did a very good job on the corner of a bumper that I thought would be very difficult to do.
Don't think they like to do anything above bumper height though ? Would have thought that they could do that OK as its small and not in an obvious place.
One thing I have found useful is those fibreglass pens you can buy for scrapping out crap on wheels. It would be ideal to get most of that off before treating it with something.
Don't think they like to do anything above bumper height though ? Would have thought that they could do that OK as its small and not in an obvious place.
One thing I have found useful is those fibreglass pens you can buy for scrapping out crap on wheels. It would be ideal to get most of that off before treating it with something.
I was thinking about looking at the Dr Colorchips stuff for touching my bumper and a few bits and bobs elsewhere (maybe even the flaky handles..?)
I've only heard good things but it looks pricey from the states and I don't know if our paint codes match the GTO codes.
Might be worth a look... www.drcolorchip.com/
I've only heard good things but it looks pricey from the states and I don't know if our paint codes match the GTO codes.
Might be worth a look... www.drcolorchip.com/
eztiger said:
I was thinking about looking at the Dr Colorchips stuff for touching my bumper and a few bits and bobs elsewhere (maybe even the flaky handles..?)
I've only heard good things but it looks pricey from the states and I don't know if our paint codes match the GTO codes.
Might be worth a look... www.drcolorchip.com/
I've only heard good things but it looks pricey from the states and I don't know if our paint codes match the GTO codes.
Might be worth a look... www.drcolorchip.com/
My work make paint up so getting paint no a problem and codes do match.
Chipsaway have been recommended to me

This stuff is good, much the same as drchips I expect, except you can buy it from Frosts in the UK.
www.frost.co.uk/item_detail.asp?productID=9544
The manufacturer, Langka, has a site here with videos etc www.langka.com.
They don't supply the paint, it's just normal touch-up, so no problems with matching.
The whole process works on the fact that touch up paint and original paint are not the same thing.
www.frost.co.uk/item_detail.asp?productID=9544
The manufacturer, Langka, has a site here with videos etc www.langka.com.
They don't supply the paint, it's just normal touch-up, so no problems with matching.
The whole process works on the fact that touch up paint and original paint are not the same thing.
ARAF said:
Moanro5.7 said:
Phoned a few places to day and both said the bonnet needs painted due 2 it being silver 

Our old BMW (Lachs Silver) had the chipsaway treatment, and it was faultless. I can't see why your local ones can't do the same.
he did not know the car so he went away and looked at it on the web and came back saying the is not a crease line in the bonnet that he could use to blend it in. Phoned a second guy and he confimed the same as the first.
Checked with the paint department and they do a gel that will treat the rust and mix me up 1/4lrt of paint and have a mate with a compressor so might invest in an air brush set and give it a go if anything will seal off the rust hopefully

Moanro5.7 said:
ARAF said:
Moanro5.7 said:
Phoned a few places to day and both said the bonnet needs painted due 2 it being silver 
Our old BMW (Lachs Silver) had the chipsaway treatment, and it was faultless. I can't see why your local ones can't do the same.
Checked with the paint department and they do a gel that will treat the rust and mix me up 1/4lrt of paint and have a mate with a compressor so might invest in an air brush set and give it a go if anything will seal off the rust hopefully

Hope you get it sortedGassing Station | HSV & Monaro | Top of Page | What's New | My Stuff



