Lightweight Wheels
Author
Discussion

jayrockwell

Original Poster:

309 posts

225 months

Friday 30th April 2010
quotequote all
General question as I've just started looking into reducing unsprung weight.

Does anyone know if any of the really lightweight wheels like Volk CE28 etc.... would happen to fit a Monaro?

Also anyone have an idea of the weight of the stock 18x8 wheels?

ringram

14,702 posts

279 months

Friday 30th April 2010
quotequote all
Some dont like the lightweight flywheels.
You lose some inertia for launch and might need to check idle speed, but in gear acceleration is obviously improved as is rear wheel horse power (Not crank bhp though)
But for high torque cars the reduction in initial inertia can actually help launch and track times due to reduction in wheelspin.
If you are interested check out the ACT twin plate clutches, they are 40% lighter than stock!


after_shock

8,751 posts

251 months

Friday 30th April 2010
quotequote all
ringram said:
Some dont like the lightweight flywheels.
You lose some inertia for launch and might need to check idle speed, but in gear acceleration is obviously improved as is rear wheel horse power (Not crank bhp though)
But for high torque cars the reduction in initial inertia can actually help launch and track times due to reduction in wheelspin.
If you are interested check out the ACT twin plate clutches, they are 40% lighter than stock!



What do they drive like, are they very different to stock or can you simply drive away as normal? Not a case of being very on off which is terrible in traffic!?

gsd2000

11,515 posts

214 months

Friday 30th April 2010
quotequote all
Standard monaro wheel with tyre is approx 20kg

i have team dynamics pro race 1.2s which are just over 7kg a corner lighter.

Monaro wheels are pcd 5x120, 18x8 +48 offset

So looo for lightweight bmw wheels with a high offset. Driftworks do rota wheels but are a low offset so wont work

ringram

14,702 posts

279 months

Friday 30th April 2010
quotequote all
after_shock said:
What do they drive like, are they very different to stock or can you simply drive away as normal? Not a case of being very on off which is terrible in traffic!?
Pedal is very light, same as stock, also disks are organic, so engagement is progressive.. same as stock. In fact the clutch feels same as stock in mine, but it will handle 850ft/lb. I did notice that I needed more rpm to launch though due to reduced weight.
I have the entry level one.

after_shock

8,751 posts

251 months

Friday 30th April 2010
quotequote all
ringram said:
after_shock said:


What do they drive like, are they very different to stock or can you simply drive away as normal? Not a case of being very on off which is terrible in traffic!?


Pedal is very light, same as stock, also disks are organic, so engagement is progressive.. same as stock. In fact the clutch feels same as stock in mine, but it will handle 850ft/lb. I did notice that I needed more rpm to launch though due to reduced weight.
I have the entry level one.


Did you go for the entry level twin plate design? Interesting this has came up as my clutch is getting a bit weird so needs replacing some time soon!

ringram

14,702 posts

279 months

Friday 30th April 2010
quotequote all
Yeah I did. Madmax might have some feedback on his soon. But his is the level 2 organic. Mine is level 1.