Wheel Whores Calculator
Discussion
Thanks for this but what would be useful is if anyone knows how much plus or minus offset people can go with no rubbing issues, either inside or outside??
For example, if your standard offset is +48 on a 8J, people can go either up to 51 for inside clearance or down to 45 for outside clearance.
This is the info that I would appreciate being put somewhere, maybe on the FAQ sticky ?
For example, if your standard offset is +48 on a 8J, people can go either up to 51 for inside clearance or down to 45 for outside clearance.
This is the info that I would appreciate being put somewhere, maybe on the FAQ sticky ?
Tattooboy said:
Thanks for this but what would be useful is if anyone knows how much plus or minus offset people can go with no rubbing issues, either inside or outside??
For example, if your standard offset is +48 on a 8J, people can go either up to 51 for inside clearance or down to 45 for outside clearance.
This is the info that I would appreciate being put somewhere, maybe on the FAQ sticky ?
TBH unless you mini tub or roll the rear lips yr fFor example, if your standard offset is +48 on a 8J, people can go either up to 51 for inside clearance or down to 45 for outside clearance.
This is the info that I would appreciate being put somewhere, maybe on the FAQ sticky ?
ked! doing wither will allow up to 10" wide rears with a 45-50 offset.I don't see the point of mini tubbing for the extra inch(?) width it gives you. If I were to spend 40 hours labour I'd go outwards instead. Don't like fibreglass so I'd be interested in talking to somebody who could fabricate new rear arches in steel to give a subtle wide body effect. I know Roger is looking at this option too. Guess it won't be cheap.
crisisjez said:
wormus said:
Guess it won't be cheap.
Or aerodynamic.;)Why do you think the Yellowbird was so fast compared to a more powerful Turbo Porsche?
I also suspect it has more power than claimed. Because it really does put in some good top speeds. Although there must also be some very efficient aerodynamic alterations too
http://www.streetfire.net/video/ruf-911-ctr-yellow...
stevieturbo said:
crisisjez said:
wormus said:
Guess it won't be cheap.
Or aerodynamic.
Why do you think the Yellowbird was so fast compared to a more powerful Turbo Porsche?
Cos the Yellowbird is a bloody legend !!!
I also suspect it has more power than claimed. Because it really does put in some good top speeds. Although there must also be some very efficient aerodynamic alterations too
www.streetfire.net/video/ruf-911-ctr-yellowbird-around-the-nurburgring_78058.htm
Its straight line speed to power is put down entirely to the choice of the non turbo body (Ie no flared arches)
I think the rear balance is destroyed by just going out with really wide wheels.
(Too much space between the wheels when viewed from the rear, which will make it Carlos Fandango)
Btw mate thought you were all for stock width as you didn't think wider made any difference, you having another Falken moment
(Too much space between the wheels when viewed from the rear, which will make it Carlos Fandango)
Btw mate thought you were all for stock width as you didn't think wider made any difference, you having another Falken moment

crisisjez said:
Btw mate thought you were all for stock width as you didn't think wider made any difference, you having another Falken moment
I would go wider if I thought it would definitely fix my traction issues but I haven't seen proof that it will and tubbing is a lot of money if it doesn't give the results I expect. I could see Harry was getting lots of wheelspin off the line at TR which is nuts considering the width of his tyres. Yours has been tubbed, can you honestly say it's made a massive difference?
wormus said:
crisisjez said:
Btw mate thought you were all for stock width as you didn't think wider made any difference, you having another Falken moment
I would go wider if I thought it would definitely fix my traction issues but I haven't seen proof that it will and tubbing is a lot of money if it doesn't give the results I expect. I could see Harry was getting lots of wheelspin off the line at TR which is nuts considering the width of his tyres. Yours has been tubbed, can you honestly say it's made a massive difference?
Now on 285 tyres
and yes there is a big improvment on mine
but iam only running 500 rwhp
Gassing Station | HSV & Monaro | Top of Page | What's New | My Stuff




with 498.7rwhp




