Power steering pulley removal - any tips?
Power steering pulley removal - any tips?
Author
Discussion

TerryS

Original Poster:

1,382 posts

279 months

Sunday 2nd May 2010
quotequote all
I had a very quick go at getting the PS pulley (LS1) off earlier with no joy. Any tips would be greatly appreciated.

snowwolf

11,503 posts

206 months

Sunday 2nd May 2010
quotequote all
TerryS said:
I had a very quick go at getting the PS pulley (LS1) off earlier with no joy. Any tips would be greatly appreciated.
I am not sure, it could be on a taper or just shrunk fit, I see you are in the southeast, I am in Rochester and will be able to get it off for you, you changing the pump?

TerryS

Original Poster:

1,382 posts

279 months

Sunday 2nd May 2010
quotequote all
snowwolf said:
TerryS said:
I had a very quick go at getting the PS pulley (LS1) off earlier with no joy. Any tips would be greatly appreciated.


I am not sure, it could be on a taper or just shrunk fit, I see you are in the southeast, I am in Rochester and will be able to get it off for you, you changing the pump?


Cheers, many thanks for the offer, I hope I can do it myself. I think it is pressed on. I am not sure the pullers I have will do the job so was hoping someone had done it and could point me on the right direction. I want to get my Vortech charger bracket off which sits behind the pulley.

snowwolf

11,503 posts

206 months

Sunday 2nd May 2010
quotequote all
TerryS said:
snowwolf said:
TerryS said:
I had a very quick go at getting the PS pulley (LS1) off earlier with no joy. Any tips would be greatly appreciated.
I am not sure, it could be on a taper or just shrunk fit, I see you are in the southeast, I am in Rochester and will be able to get it off for you, you changing the pump?
Cheers, many thanks for the offer, I hope I can do it myself. I think it is pressed on. I am not sure the pullers I have will do the job so was hoping someone had done it and could point me on the right direction. I want to get my Vortech charger bracket off which sits behind the pulley.
Probably is shrunk on, a quick heat from a small blow torch on the right spot should release it quckly, I will have a look at mine in the morning, if your local to rochester, I will have a small hyd puller at work you can borrow

TerryS

Original Poster:

1,382 posts

279 months

Sunday 2nd May 2010
quotequote all
Unfortunately I am in Watford. Would appreciate your thoughts if you get a chance to take a peek at yours. I will give it another go tomorrow before I get the MAPP gas out on it.

Boosted LS1

21,200 posts

291 months

Sunday 2nd May 2010
quotequote all
Iirc there's a a tool to remove these. I had to change some a few years ago. Do you need a new pulley for some reason?

TerryS

Original Poster:

1,382 posts

279 months

Sunday 2nd May 2010
quotequote all
Thanks Mike I did wonder if it needed a special tool. I only need to remove it to get the supercharger bracket off. I do however have another pulley here.

stevieturbo

18,105 posts

278 months

Monday 3rd May 2010
quotequote all
It's something like that

http://www.summitracing.com/parts/OTC-7362/


If you're stuck....remind me of your address and I can send one over. Oddly...cant find my exact one on Summit. I'm sure it cost less than $30 though a few years ago. It's one of the above items. Removes and installs.


Although obviously it'll take a couple of days due to May Day etc.

TBH, I wouldnt dick about with DIY options. They'll just end up making a mess.

Edited by stevieturbo on Monday 3rd May 00:06

Trailermasher

730 posts

253 months

Monday 3rd May 2010
quotequote all
Is it not easier to dismount the PS pump? confused

TerryS

Original Poster:

1,382 posts

279 months

Monday 3rd May 2010
quotequote all
stevieturbo said:
It's something like that

www.summitracing.com/parts/OTC-7362/


If you're stuck....remind me of your address and I can send one over. Oddly...cant find my exact one on Summit. I'm sure it cost less than $30 though a few years ago. It's one of the above items. Removes and installs.


Although obviously it'll take a couple of days due to May Day etc.

TBH, I wouldnt dick about with DIY options. They'll just end up making a mess.

Edited by stevieturbo on Monday 3rd May 00:06


Thanks for the offer as always Stevie, I really should get myself one though.

This looks similar to the Summit offering
http://cgi.ebay.com/ebaymotors/GM-POW

Does it look right? I assume it is simple to use?

TerryS

Original Poster:

1,382 posts

279 months

Monday 3rd May 2010
quotequote all
Trailermasher said:
Is it not easier to dismount the PS pump? confused


I would still need to get the pulley off as the supercharger bracket goes over the pump shaft.

stevieturbo

18,105 posts

278 months

Monday 3rd May 2010
quotequote all
Yip, that's the one. I'd need to check the number for sure, but I'd say its the exact same one I bought from Summit.

Trailermasher

730 posts

253 months

Monday 3rd May 2010
quotequote all
TerryS said:
Trailermasher said:
Is it not easier to dismount the PS pump? confused
I would still need to get the pulley off as the supercharger bracket goes over the pump shaft.
It's never as easy as it should be!!! wink

L2VXR

1,014 posts

244 months

Monday 3rd May 2010
quotequote all
Again the info is from pontiac gto and seems to be the same info for LS1 & LS2 (no guarantee's but that's what the book say's)

both tools that are mentioned are listed on the summit website



TerryS

Original Poster:

1,382 posts

279 months

Tuesday 4th May 2010
quotequote all
Thanks Guys, I have just ordered KD Tools set # 2897 via US Ebay. I will try and remember to let you know how it works out.

monkfish1

12,522 posts

255 months

Tuesday 4th May 2010
quotequote all
TerryS said:
Thanks Guys, I have just ordered KD Tools set # 2897 via US Ebay. I will try and remember to let you know how it works out.


You will need the installer tool too. You can improvise taking it off, but not putting it on!

stevieturbo

18,105 posts

278 months

Tuesday 4th May 2010
quotequote all
I think most come as a set...installer and remover ? The ebay link was, and mine did ?

You absolutely need both though.

TerryS

Original Poster:

1,382 posts

279 months

Tuesday 4th May 2010
quotequote all
Thanks Roger, as Stevie says the kit should do both:
www.kd-tools.com/2897.htm