Transfer Data From Old SATA Drive
Transfer Data From Old SATA Drive
Author
Discussion

Soft Top

Original Poster:

1,493 posts

249 months

Sunday 2nd May 2010
quotequote all
I am bashing my head against the wall with this one! I am sure I must be missing something but I can't see it.

I have a PC that I am rebuilding by reinstalling Windows on a new drive. I want to copy all the data from the old drive across to the new one so that photos, music, etc. can be saved.

I have tried with a powered SATA to USB adaptor but after a short while copying I get a Delayed Write Error. I have tried many things such as setting the power control options for the USB not to turn off connected devices, turned off any performance enhancement on the drive, different SATA cables and anything else I can find on Google.

I keep getting delayed write failures! I have also tried setting the drive as a second device in another PC with 2 SATA controllers but it doesn't appear.

I have never had such problems with IDE drives. Perhaps I am naive that the process would be the same with SATA drives.

The OS on the old drive is XP Pro which is the same as on the new install. The machine I put the drive on the second SATA controller is Windows 7. If you need any more info please ask.

Any help/advice that anyone can give me would be gratefully appreciated. Thanks.

V8mate

45,899 posts

220 months

Sunday 2nd May 2010
quotequote all
Are you trying to transfer large quantities of files at once? Try smaller batches?

Scraggles

7,619 posts

255 months

Sunday 2nd May 2010
quotequote all
had a raid array on vista, installed win7 on a new drive, shoved the old raid array as slot 3/4 and works fine

why re-install with xp ?

Soft Top

Original Poster:

1,493 posts

249 months

Sunday 2nd May 2010
quotequote all
I am trying to transfer a lot of files at once but I don't really see a way round this as I am trying to transfer tens of thousands of files and it can fail at anything between 30 and 500 files so it could take years to do 20 files at a time.

Obvioulsy this may work but I don't have time to do it.

I am installying XP as I have a licence for this and not for Windows 7. It does give me a an idea though. I haven't tried the USB adaptor in my Winows 7 PC. Will go and give that a go.

Arj256

82 posts

218 months

Sunday 2nd May 2010
quotequote all
Thought about hotswapping the drive to see if that solves the issue?

Soft Top

Original Poster:

1,493 posts

249 months

Sunday 2nd May 2010
quotequote all
Arj256 said:
Thought about hotswapping the drive to see if that solves the issue?
Nope, I could give this a go if you think it might work. Trying the USB to SATA adaptor in my Windows 7 PC at present. Hasn't died so far but is still trying to calculate the time to copy!

Soft Top

Original Poster:

1,493 posts

249 months

Sunday 2nd May 2010
quotequote all
It was looking good on Windows 7 but is now stuck after copying almost 2000 files. It hasn't given the delayed write error yet but it does seem to have failed. Bugger - I was feeling quite confident for 10 minutes.

I can't be bothered trying to hot swap the dirve tonight so will give it a go tomorrow. Is this really likely to work with a standard SATA drive though?

Soft Top

Original Poster:

1,493 posts

249 months

Sunday 2nd May 2010
quotequote all
OK, I might have spoken too soon. It has taken it 30 minutes but it seems to have transferred another few files over.

Perhaps Windows 7 just perseveres more than XP!

Man-At-Arms

5,920 posts

210 months

Monday 3rd May 2010
quotequote all
how are you copying the files ?
in windows explorer , copy and paste ?
you might be confusing the memory or swapfile

try using robocopy or write an xcopy batch file


Cerberus90

1,553 posts

244 months

Monday 3rd May 2010
quotequote all
Could it potentially be that the Hard drive is damaged?

I can't see any reason why you shouldn't just be able to plug a HDD in and copy things off it, unless its damaged somehow.
I've done it a million times with about 500GB+ of data with no problems.

This is a long shot too, but what format are you using NTFS or FAT32? FAT32 has a file size limit, so a single file can't be larger than, 4GB or something around that.
But by the sounds of it, it can fail on random files, so this probably isn't the problem.

Soft Top

Original Poster:

1,493 posts

249 months

Monday 3rd May 2010
quotequote all
Thanks for the answers. To get it going I've just booted the drive up in the machine and am copying off what I can. It's a bit painful when copying Documents and settings as it keeps finding things in use but I'm getting there. Once I have everything I can get I might try robocopy or something similar. Thanks for your help.