Pre-Bios computer boot
Discussion
If you've got another computer which takes the same chips you can sometimes get away with hot-swapping the chips to get the corrupt one flashed, otherwise you can use one of the services that advertise online to get a new chip sent out to you. I used http://bios-repair.co.uk/ when I 'bricked' my HP box last year - the service was cheap and good 

It's an old board, not a big name manufacturer.
The major problem (I reckon) is that none of the ports will be set so I can't use the keyboard, hard drive or USB unless I can directly access the cpu and set a port via an unset port using a low level (probably Linux based) programme.
May be easier just to unsolder the bios chip and replace it with a working bios chip.
The major problem (I reckon) is that none of the ports will be set so I can't use the keyboard, hard drive or USB unless I can directly access the cpu and set a port via an unset port using a low level (probably Linux based) programme.
May be easier just to unsolder the bios chip and replace it with a working bios chip.
Gassing Station | Computers, Gadgets & Stuff | Top of Page | What's New | My Stuff



