37"-42" Plasma with VGA input?
Author
Discussion

HereBeMonsters

Original Poster:

14,180 posts

213 months

Wednesday 5th May 2010
quotequote all
We're looking for a new plasma screen here at work, something around 37"-42", Plasma with a VGA input for connecting to a PC to run OCS. Full HD would be a bonus. Doesn't even need a tuner, but "TVs" seems cheaper than the equivalent "PC Screen" with the same features.

Looking to buy from a reputable supplier, with a decent guarantee. Any recommendations?

LeoSayer

7,865 posts

275 months

Wednesday 5th May 2010
quotequote all
In my experience, connecting a pc to a tv via VGA never works properly.

Some plasmas have non-square pixels which makes getting the settings right a complete pain. You have to squash the picture or stretch it, realign it and no matter how much you fiddle it always looks awful, especially for viewing text.

My advice is get a dedicated monitor or find a way to connect to the tv via HDMI/DVI instead.

GregE240

10,857 posts

298 months

Wednesday 5th May 2010
quotequote all
LeoSayer said:
In my experience, connecting a pc to a tv via VGA never works properly.

Some plasmas have non-square pixels which makes getting the settings right a complete pain. You have to squash the picture or stretch it, realign it and no matter how much you fiddle it always looks awful, especially for viewing text.

My advice is get a dedicated monitor or find a way to connect to the tv via HDMI/DVI instead.
What our friend Leo says.

Get a DVI to HDMI converter cable and DVI out of the PC to an HDMI input. Cable will cost you upwards of about 12 quid.

Bear in mind that a 15-pin DSUB is analogue, whereas your DVI / HDMI combo will be completely digital - much nicer.

Road2Ruin

6,571 posts

247 months

Wednesday 5th May 2010
quotequote all
I am afarid to say I have to disagree with the above two posts. I have always found conecting with a VGA cable completely pain free and with excellent results. All major GPU manufacturers have drivers that support modern TV resolutions. In fact the only time I had a problem was when I tried to connect with a HDMI cable. The GPU would not allow me to choose the resoltion compatible with the TV, 1366x768, and everything else looked rubbish.

E31Shrew

5,967 posts

223 months

Wednesday 5th May 2010
quotequote all
Probably better off going for a FHD LCD for this application.

E31Shrew

5,967 posts

223 months

Wednesday 5th May 2010
quotequote all
Road2Ruin said:
I am afarid to say I have to disagree with the above two posts. I have always found conecting with a VGA cable completely pain free and with excellent results. All major GPU manufacturers have drivers that support modern TV resolutions. In fact the only time I had a problem was when I tried to connect with a HDMI cable. The GPU would not allow me to choose the resoltion compatible with the TV, 1366x768, and everything else looked rubbish.
Agree with that. I had forgotten that the latest S20 and X20 PANASONIC plasmas no longer have VGA in. Sold a few to a local school and couldnt for the life of me, get the VGA to HDMI converter to work properly. Ended up supplying the G20 wth VGA in and all was rosy

HereBeMonsters

Original Poster:

14,180 posts

213 months

Wednesday 5th May 2010
quotequote all
We currently have 3 or 4 screens around the business, all running fine on VGA. Can't buy the same screens though as they are no longer made - hence looking for a recommendation for a new one.

I have found one which has VGA, DVI and HDMI - Panasonic 42" Plasma, 400hz, 1080p etc. etc. on dabs.com
That looks like the cookie, as I am very happy with my Panasonic at home.

LordGrover

34,191 posts

243 months

Wednesday 5th May 2010
quotequote all
We have Samsung 50" plasmas dotted about:



I think they have vga inputs but I just popped HDMI PCI riser cards in the PCs and it works fine.