OBDII Laptop Connecter
Discussion
Hi All,
I've done a search but not come up with anything conclusive.
I just want to connect my OBDII port (Exige) to a PC (USB / Serial etc). Don't need the software, just the cheapest connecter that isn't some Ebay Chinese offering that's going to fry my ECU!
Any suggestions would be most appreciated!
Regards,
Rob
I've done a search but not come up with anything conclusive.
I just want to connect my OBDII port (Exige) to a PC (USB / Serial etc). Don't need the software, just the cheapest connecter that isn't some Ebay Chinese offering that's going to fry my ECU!
Any suggestions would be most appreciated!
Regards,
Rob
Something like this?

rjben said:
Don't need the software...
'Don't need' as in 'I already have it' or as in 'don't need it since I'll just stare real hard at it so it will give me the error codes'? 
You need an ELM327 OBDII/EOBD to Serial interface, there are loads about.
Personally I use the Gendan Bluetooth version and have had no issues.
USB version of the same here:
http://www.gendan.co.uk/product_ELM327.html
Nothing wrong with most cheap Ebay ELM327 interfaces to be honest. Most can be had for £20ish, not really highly technical electronics wise. Just pick one with decent Ebay Feedback.
Personally I use the Gendan Bluetooth version and have had no issues.
USB version of the same here:
http://www.gendan.co.uk/product_ELM327.html
Nothing wrong with most cheap Ebay ELM327 interfaces to be honest. Most can be had for £20ish, not really highly technical electronics wise. Just pick one with decent Ebay Feedback.
Gassing Station | General Gassing [Archive] | Top of Page | What's New | My Stuff


