Passat 1.9 Tdi PD130 running like a bag of crap.
Discussion
Had this car for 12 months now and apart from the common water pump problem its been pretty much fine.
Anyway after a sustained blast (just below 3 figures i'll add) i slowed down and it was making a horrible rattling sound, anyway as i sped up it smoothed out slightly but since it has been running rough (like an old 1.8D escort) lots of vibration through the steering and gearstick at certain revs and a slight loss of power, not sure if it could be the turbo as i can hear a rush of air from the engine when accelerating from low revs or its the dreaded duel flywheel.
There is no smoking from the exhaust so i'm hoping nothing major.
I'm not a mechanic so i haven't a clue i'm just hoping it doesn't cost big bucks to put right.
Thanks in advancee.
Cheers.
Anyway after a sustained blast (just below 3 figures i'll add) i slowed down and it was making a horrible rattling sound, anyway as i sped up it smoothed out slightly but since it has been running rough (like an old 1.8D escort) lots of vibration through the steering and gearstick at certain revs and a slight loss of power, not sure if it could be the turbo as i can hear a rush of air from the engine when accelerating from low revs or its the dreaded duel flywheel.
There is no smoking from the exhaust so i'm hoping nothing major.
I'm not a mechanic so i haven't a clue i'm just hoping it doesn't cost big bucks to put right.
Thanks in advancee.
Cheers.
If the rush of air you hear os louder than normal could be a boost leak, but I would expect to see smoke from the exhaust if it was that.
If its got a misfire it Could be a faulty injector. Hard to say from that description.
If it was flywheel braking up the car would fire on all cylinders but vibrate when reved and the clucth pedal would feel funny.
If its got a misfire it Could be a faulty injector. Hard to say from that description.
If it was flywheel braking up the car would fire on all cylinders but vibrate when reved and the clucth pedal would feel funny.
Its definetely not smoking, but i get this vibration and sometimes i dont, it seems very tempremental. Its had a little grumbling sound at low revs in higher gears since i bought it. And yes the clutch does feel a bit odd if that makes any sense although it seems to be working ok at the mnoment.
Well its sounding like the flywheel to be honest. I know this is big money so not a happy bunny 
Every time i speak to someone who has a diesel they always end up with big bills. I ask myself is it actually worth the savings in fuel when any problems just wipe out any potential savings you may have had?

Every time i speak to someone who has a diesel they always end up with big bills. I ask myself is it actually worth the savings in fuel when any problems just wipe out any potential savings you may have had?
Dual mass flywheels are a pain in the ass, as they are just 2 bits of metal held together with springs - So this means they wear out break. I replaced my dual mass with a single mass flywheel as soon as I could - then at least you know the flywheel will never break because it is a single piece of metal.
New DMF is not that expensive to buy but lots of garage labour as gearbox needs dropping - I would say 8 hours.
New DMF is not that expensive to buy but lots of garage labour as gearbox needs dropping - I would say 8 hours.
CHIEF said:
I've been quoted 175 quid to do the clutch (thats been advised) and the flywheel. The price i got for the clutch and dmf was £550.
Would a single flywheel make it a bit more bulletproof, would it be cheaper but is this at the expense of smoothness?
Cheers chaps.
Is that 550 to do the job inc parts? Seems ok to me, heard of 700+ being paid for that job.Would a single flywheel make it a bit more bulletproof, would it be cheaper but is this at the expense of smoothness?
Cheers chaps.
Silver940 said:
CHIEF said:
I've been quoted 175 quid to do the clutch (thats been advised) and the flywheel. The price i got for the clutch and dmf was £550.
Would a single flywheel make it a bit more bulletproof, would it be cheaper but is this at the expense of smoothness?
Cheers chaps.
Is that 550 to do the job inc parts? Seems ok to me, heard of 700+ being paid for that job.Would a single flywheel make it a bit more bulletproof, would it be cheaper but is this at the expense of smoothness?
Cheers chaps.
Gassing Station | Audi, Seat, Skoda & VW | Top of Page | What's New | My Stuff


