Oil pressure gauge

[Blu3R]

I want to fit an oil pressure gauge and the Telemetrix range list 2. Which would be more suitable, 7 Bar or 10 Bar? I asuumed 7 would be fine but not so sure now I've seen they do a 10?
Car is standard so no uprated pump or anything.

Also, the optional pressure/temp gauge that could be specced with a TDS, does it have the Noble branding on the face of the gauge? And is it for oil pressure and oil temperature?

Edited by Blu3R on Thursday 13th May 15:26

[anotherdom]

Going from memory here, but it was only a couple of weeks ago I saw one fitted. I think it was marked Noble and also had both oil temp and oil pressure gauges.

Dom.

[david.mt]

Well not sure if it answers your questions but on my M400 the dual oil gauge is for pressure and temperature and it is Noble branded. The pressure is scaled to 80 psi which is around 5.5 bar so the 7 bar gauge should be fine.

[Blu3R]

Thanks both of you.

david.mt said:

Well not sure if it answers your questions but on my M400 the dual oil gauge is for pressure and temperature and it is Noble branded. The pressure is scaled to 80 psi which is around 5.5 bar so the 7 bar gauge should be fine.

Hmmm maybe the dual gauge might be a better idea all round then...