Mk5 Escort
Author
Discussion

VsGTSR

Original Poster:

26 posts

196 months

Thursday 13th May 2010
quotequote all
Hey Guys,

I have this mk5 escort 1.6v 16v jobby which i picked up of a mate the other day and i have just had a look over the body and stuff the exterior is panel work is straight and good engine starts first time everytime which is a bonus,, but upon having a look on the underside i have found that the rear chassis rails have got a fair amount of rust on it and has rusted through to form a biggish hole around the drain points areas near the bottom trailing arm joints on both sides..

Now what i was wondering if any of you guys know if i could weld some plate metal there to give the strenght back into the sturcture? or is it worth just scraping it for parts?

cheers fellas

vsgtsr

stevenr

940 posts

220 months

Thursday 13th May 2010
quotequote all
scratchchin It's not like an old Escort to be rusty.

You could get the chassis legs welded but probably more hassle than it's worth to be honest.

theconrodkid

372 posts

286 months

Saturday 15th May 2010
quotequote all
common point on them,ive done loads,about 1 hour a side.
also check the door sills where the front door drain holes exit onto the top of the sill

VsGTSR

Original Poster:

26 posts

196 months

Sunday 16th May 2010
quotequote all
cheers fellas,

thanks for the info and ill make the decision on wether to keep the escort or not now..

i have had a look at the sills and boths sides require some attention..

once again
cheers for the info..