GSX600

[Pilo-Wedgebits]

Paul,

I dont know what your plans are with your car but do you want a wiring loom from a 350i. Ive taken it out as best I can just in case. Let me know or I'll bin it.

Cheers mate

Shaun

[gsx600]

Hi Shaun

A wiring loom would be perfect as probably not too many difference between 350 and 400 with regards to basic electrics

I've started striping the old car down and nearly cleared the engine bay of burnt wiring and badgered electrics / plumbing / melted plastic etc

The weekend will be the worst when I gut the inside and see if I can save the fibreglass dash and metal panels.

Were you also the person that had the body shell going (as that the front end wold be usefull to help recover mine)and basically everything that was attached

As I'm looking to start from scratch and replace everything as it is well and truly bugge****d

Drop us an email as to what you would be looking for the various bits you have / want to get rid of as a job lot, as may have to start saving if the insurance doesn't pull through

I was looking at a modular wiring loom on internet, but not sure how close this would be. Also looking to put digital dash in and maybe some more modern twin round lamps in the pods, or even in perspex in the pods ( so pods are fixed )

Cheers

Paul

[Pilo-Wedgebits]

Hi Paul,

The loom, relay board and fuse box is yours if you want it - it is still attached together of course.

I have a complete bodyshell off a 350i (although it now has a gaping hole in the front between the pods as I have cut it out to make getting to the rad easier) I also have a 350i front end cut off at the door pillars. I was planning to cut the bodyshell up this weekend because I need to pull the engine out etc etc. So far I still have all the parts inc interior, doors, motors etc etc - I was planning to start to put the parts onto ebay so if you want any of it including the shell can you let me know asap. The pods I am selling will be sold with brand new headlights, bowls and bulbs which I bought but never fitted.

Cheers

Shaun

[gsx600]

Hi Shaun

Yes want it please. But don't need the headlight pods as too large for my beast

But will take def take as much loom and front end as I can get. So have you 2 front ends ? If so could you get some pictures sent to me so I can try an work out if basically the same wings / inner arches / front cross members / bulkheads

You could mail me pictures at [e-mail] if poss

Many thanks

Paul