600bhp Charger
Discussion
If done by WP you'll need it tuned again, MF can do it all and provide a better package and Rapid can do it all with a dyno tune.
You should get 600fly easily.
What are you looking for, Gen V (112,122) or Gen VI (TVS 1900, 2300) and which engine?
I got around 530fwhp with stock LS2 and WP fitted Harrop 122, but 483rwhp (about 603fly - auto, so different gearing) and much stronger torque after another tune elsewhere (Mark).
You should get 600fly easily.
What are you looking for, Gen V (112,122) or Gen VI (TVS 1900, 2300) and which engine?
I got around 530fwhp with stock LS2 and WP fitted Harrop 122, but 483rwhp (about 603fly - auto, so different gearing) and much stronger torque after another tune elsewhere (Mark).
Mark
Not sure, called Andy a while back, told 600 was max on standard LS2. Was down last year and had Bi-Modal Cat Back,re-mapped, induction kit an Peddars shocks fitted. Was very impressed, apart from the suspension. Rear O/S dips quite bad on cornering, mabey a faulty component but no signs of any leaks or obvious wear. Concerned about the miles mine has done, only 4 months left on maufacturers warranty. Long way to travel and lots of dosh! just want to be sure, need the car for work. Thanks.
Not sure, called Andy a while back, told 600 was max on standard LS2. Was down last year and had Bi-Modal Cat Back,re-mapped, induction kit an Peddars shocks fitted. Was very impressed, apart from the suspension. Rear O/S dips quite bad on cornering, mabey a faulty component but no signs of any leaks or obvious wear. Concerned about the miles mine has done, only 4 months left on maufacturers warranty. Long way to travel and lots of dosh! just want to be sure, need the car for work. Thanks.
007 VXR said:
Tommyt 0077 said:
Hi 007
Gonna call them the morn. Cheers!
fancy coming down south on the 20th with some other scots for a meet Gonna call them the morn. Cheers!
would happly take you a spin in mine
see the scot are invading thread ??
never been in a s/c one

give Mark Frisby a call, ex LSV and RapidGB, now working under lsv8power name on 01234 881135, he's an official importer for the magnacharger range. get yourself one of the nice tvs2300 chargers he's fitted to a few cars on here if you plan to keep the car long term and perhaps go further later. Keep your options open and see where you get the best deal on price by speaking to walkinshaw, Mark Frisby and also Roger at Monkfish. There can be a considerable difference in price between them all. Though I'd be tempted to look at other non forced induction options as well going by the recent spate of FI engines needing rebuilt.
Tommyt 0077 said:
Mark
Not sure, called Andy a while back, told 600 was max on standard LS2. Was down last year and had Bi-Modal Cat Back,re-mapped, induction kit an Peddars shocks fitted. Was very impressed, apart from the suspension. Rear O/S dips quite bad on cornering, mabey a faulty component but no signs of any leaks or obvious wear. Concerned about the miles mine has done, only 4 months left on maufacturers warranty. Long way to travel and lots of dosh! just want to be sure, need the car for work. Thanks.
Sorry, Mark of Rapid GB, now trading as LS Power, his new webite isn't up and running yet, I posted his contact details a couple of weeks ago, I'll look them up for you.Not sure, called Andy a while back, told 600 was max on standard LS2. Was down last year and had Bi-Modal Cat Back,re-mapped, induction kit an Peddars shocks fitted. Was very impressed, apart from the suspension. Rear O/S dips quite bad on cornering, mabey a faulty component but no signs of any leaks or obvious wear. Concerned about the miles mine has done, only 4 months left on maufacturers warranty. Long way to travel and lots of dosh! just want to be sure, need the car for work. Thanks.
With a stock LS2 and 122 600ish is about right, you should get a little more with a TVS2300, but would racommend upgraded internals, exhaust and heads (plus cam) to release it's potential. With a TVS 1900 you could still get 630-650 peak, but your getting near the limits of the stock set up.
I'm not really interested in peak numbers, but I've just taken my 122 off and and am using more fuel as there is so little low down torque without it. I'll be going for a TVS2300 on a LS2 412 or LS3 423ish and should still only need 7-9psi to get double the torque at the wheels.
ETA: I type too slow
number already given 2nd ETA: Can't speel either!

Going
!Edited by Trailermasher on Thursday 13th May 23:51
Edited by Trailermasher on Friday 14th May 00:44
Tommyt 0077 said:
Hi 007VXR
Aye,already lookin at that. Cme back from holiday on 16th, gotta be down south again on 24th so will try to squeeze it in! Think Iwill be camping though, by the time I know if I can make it everything will be booked solid!
let me know .. sure we can look after you some how Aye,already lookin at that. Cme back from holiday on 16th, gotta be down south again on 24th so will try to squeeze it in! Think Iwill be camping though, by the time I know if I can make it everything will be booked solid!

paul450 said:
007 VXR said:
Tommyt 0077 said:
Hi 007
Gonna call them the morn. Cheers!
fancy coming down south on the 20th with some other scots for a meet Gonna call them the morn. Cheers!
would happly take you a spin in mine
see the scot are invading thread ??
never been in a s/c one

007 VXR said:
paul450 said:
007 VXR said:
Tommyt 0077 said:
Hi 007
Gonna call them the morn. Cheers!
fancy coming down south on the 20th with some other scots for a meet Gonna call them the morn. Cheers!
would happly take you a spin in mine
see the scot are invading thread ??
never been in a s/c one




will bring my sat-nav just incase you get lost



Get yourself some forged rods and pistons, a cam and a Tvs2300 THEN STOP. It will be the cheapest and most reliable way to 650ish whp. Go any more and you'll start having problems. I'm running 15psi on my 2300 and have had to convert to an LQ9 block to cope with the 990lbs torque. The alloy one split so be warned: go nuts and you will pay the price. Having said that, I might have to ask Mark to put 18psi through it just to see what happens!
oh hadnt heard that, knew you'd done a couple from what folk were saying on here but didnt know you'd taken on the same dealer status as you'd previously focussed on the Harrop stuff while Mark was offering the Magnacharger range. More the merrier when it comes to suppliers and installers I say, keeps our options open for long term support on the products. Now if Mark would take on say the Pedders range then we'd have competition for suspension parts as well 

Gassing Station | HSV & Monaro | Top of Page | What's New | My Stuff






Already ordered an exhaust from Oz for more noise, then the pound dropped even more.