Discussion
Yeah they will fit mate.
Poor Wormus, looks like he is trying to blow his as yet incomplete iron block up.
I dont know how much more power you will get. I wouldnt have thought your current heads were holding you back that much.
Sure you will get some more power, but it sounds more to me that you want less power, not more, then your car might be on the road for longer before busting.
Poor Wormus, looks like he is trying to blow his as yet incomplete iron block up.
I dont know how much more power you will get. I wouldnt have thought your current heads were holding you back that much.
Sure you will get some more power, but it sounds more to me that you want less power, not more, then your car might be on the road for longer before busting.
ringram said:
Yeah they will fit mate.
Poor Wormus, looks like he is trying to blow his as yet incomplete iron block up.
I dont know how much more power you will get. I wouldnt have thought your current heads were holding you back that much.
Sure you will get some more power, but it sounds more to me that you want less power, not more, then your car might be on the road for longer before busting.
Cheeky fPoor Wormus, looks like he is trying to blow his as yet incomplete iron block up.
I dont know how much more power you will get. I wouldnt have thought your current heads were holding you back that much.
Sure you will get some more power, but it sounds more to me that you want less power, not more, then your car might be on the road for longer before busting.
ker!
yours is still broke and that NA!! 
If the price is right I might get them and store them for future work...?
wormus said:
yes mate, they are LS2 heads and will work brill with your 122. The TVS needs feeding and I suspect the exhaust side of my setup is holding me back. You have first dibs. I'll speak to Mark to see what they are worth.
Im also speaking to him tomorrow as mine should have been built and ready by now, he did promise way before my holiday..... If its not IL be expecting him to supply and fit them for free TBH! 
ringram said:
Yeah they will fit mate.
Poor Wormus, looks like he is trying to blow his as yet incomplete iron block up.
I dont know how much more power you will get. I wouldnt have thought your current heads were holding you back that much.
Sure you will get some more power, but it sounds more to me that you want less power, not more, then your car might be on the road for longer before busting.
Torque breaks stuff and I have 950lbs but it tails off as rpm rises. I need to speak to Mark but I suspect flow is holding me back.Poor Wormus, looks like he is trying to blow his as yet incomplete iron block up.
I dont know how much more power you will get. I wouldnt have thought your current heads were holding you back that much.
Sure you will get some more power, but it sounds more to me that you want less power, not more, then your car might be on the road for longer before busting.
wormus said:
ringram said:
Yeah they will fit mate.
Poor Wormus, looks like he is trying to blow his as yet incomplete iron block up.
I dont know how much more power you will get. I wouldnt have thought your current heads were holding you back that much.
Sure you will get some more power, but it sounds more to me that you want less power, not more, then your car might be on the road for longer before busting.
Torque breaks stuff and I have 950lbs but it tails off as rpm rises. I need to speak to Mark but I suspect flow is holding me back.Poor Wormus, looks like he is trying to blow his as yet incomplete iron block up.
I dont know how much more power you will get. I wouldnt have thought your current heads were holding you back that much.
Sure you will get some more power, but it sounds more to me that you want less power, not more, then your car might be on the road for longer before busting.
You claim you have 950lbft....aside from a number, what does that actually allow you to do with the car ? Have you managed any race events ? a track day ? a dyno queen day ? Even some reliable road miles ?
And regardless how efficient you think the blower is, yes torque will rise, then fall. Same as any engine, any blower. Just the PD style torque will tend to peak much earlier than other designs. And likely camshaft is also a limiting factor too. It will probably have more impact than heads....but then of course emissions will become an issue.
It's highly unlikely heads are going to have any massive impact on power/torque as that is largely governed by the blower itself, apart from on your wallet. Especially with the crap exchange rate at the minute.
ringram said:
Nah mate, its the way the blower works. To get the top end you need a centri. You might get a bit more with heads, but I think your blower is resticting your top end. Stevie Im sure will have more details. But check out the efficiency map for each type.
I know what you are saying but between 12 and 15psi torque rose by 170lbs between 2500 rpm and 5000rpm but tails off towards 6500rpm. Boost is a flat 15psi right up to 7000rpm so I can only guess the exhaust is holding things back.wormus said:
ringram said:
Nah mate, its the way the blower works. To get the top end you need a centri. You might get a bit more with heads, but I think your blower is resticting your top end. Stevie Im sure will have more details. But check out the efficiency map for each type.
I know what you are saying but between 12 and 15psi torque rose by 170lbs between 2500 rpm and 5000rpm but tails off towards 6500rpm. Boost is a flat 15psi right up to 7000rpm so I can only guess the exhaust is holding things back.No its your emissions friendly cam. If it was the exhaust you'll show capped HP.
Edited by crisisjez on Sunday 16th May 21:23
wormus said:
ringram said:
Nah mate, its the way the blower works. To get the top end you need a centri. You might get a bit more with heads, but I think your blower is resticting your top end. Stevie Im sure will have more details. But check out the efficiency map for each type.
I know what you are saying but between 12 and 15psi torque rose by 170lbs between 2500 rpm and 5000rpm but tails off towards 6500rpm. Boost is a flat 15psi right up to 7000rpm so I can only guess the exhaust is holding things back.When I ran at FT ages ago....I did 198 in 7/8th mile with some 16psi measured at the collector in my exhaust.
Little did I realise at the time, that the 2 spiral flows I had in the centre had totally collapsed, and there was barely 2" of an opening available for gasses to get through.
It will be your blower, and camshaft. And taling off as you describe is totally normal unless you are building a rev monster.
ringram said:
In summary. Dont buy the heads mate. Swap the cam for more power than the head swap would give..
Cheers, but swap it for what? I have nearly max torque between 2000 - 4000rpm which feels great but it tails of quickly between 4000-6500rpm. Boost is dead flat all the way along. I like the initial grunt but I want it to continue all the way through the rpm range. Surely a different cam will just move the curve up and down the range, not change its shape while being emissions friendly?
What makes you sure it's not flow capacity? I would have thought with better flow I need less duration which will pass emissions?
Edited by anonymous-user on Monday 17th May 14:14
wormus said:
while being emissions friendly?
Error! You are therefore limited in your choice. Assuming your cam is at the limit now, heads will help. This is exactly why I have LS7 heads. A smaller cam will flow more air through the large LS7 valves.
Same applies to the LS3 type heads and 2.16" intake valve instead of the 2.0x" cathedrals.
Best head for emissions for you on 4" bore will be CNC Ported LS3 type heads or Mast/PI aftermarkets.
Ask yourself why GM went to these heads... Euro4 compliance, California compliance etc..
But they will probably lift your power up rather than carrying it forward in the RPM range.
ringram said:
wormus said:
while being emissions friendly?
Error!
You are therefore limited in your choice. Assuming your cam is at the limit now, heads will help. This is exactly why I have LS7 heads. A smaller cam will flow more air through the large LS7 valves.
Same applies to the LS3 type heads and 2.16" intake valve instead of the 2.0x" cathedrals.
Best head for emissions for you on 4" bore will be CNC Ported LS3 type heads or Mast/PI aftermarkets.
Ask yourself why GM went to these heads... Euro4 compliance, California compliance etc..
But they will probably lift your power up rather than carrying it forward in the RPM range.
Thanks. I assume you are referring to these? www.mastmotorsports.com/black-label-page.php?id=104 .By the looks they should also fit Gen III LQ9 but I'm not sure if my blower will fit?
horsepower = (torque*engine speed) / 5252 so more power = more torque further up the RPM range?
Edited by anonymous-user on Monday 17th May 16:44
Gassing Station | HSV & Monaro | Top of Page | What's New | My Stuff


