600whp - NA or FI cost.
Discussion
Well, if you are talking fwhp.
Then thats about 480rwhp.
Or are you talking 600rwhp? In which case about 750fwhp.
Thats a hard ask for NA with a daily driver cam. Though there are plenty of 1000fwhp ls race engines. You need pricey valvetrain parts. Mine choked on stock lifters with a healthy street cam profile. Jesel, TD, Manton, PSI, Solid rollers etc need to be brought to bear.
500 cube engines might get you close, but cost mega.
Id think a budget 402 with centri, heads and cam would be best. Very close to Stevie's recipie in fact. TerryS's LS1 gets the same rwhp as my 7.2L NA with the same formula.
Then you dont need to go mental on the valve train, you can just use forged pistons and a decent rotating assembly and fair heads and cam.
Im not sure on final cost but Id expect as you go past 550rwhp level FI will get cheaper. Up to then I recon NA is best.
Then thats about 480rwhp.
Or are you talking 600rwhp? In which case about 750fwhp.
Thats a hard ask for NA with a daily driver cam. Though there are plenty of 1000fwhp ls race engines. You need pricey valvetrain parts. Mine choked on stock lifters with a healthy street cam profile. Jesel, TD, Manton, PSI, Solid rollers etc need to be brought to bear.
500 cube engines might get you close, but cost mega.
Id think a budget 402 with centri, heads and cam would be best. Very close to Stevie's recipie in fact. TerryS's LS1 gets the same rwhp as my 7.2L NA with the same formula.
Then you dont need to go mental on the valve train, you can just use forged pistons and a decent rotating assembly and fair heads and cam.
Im not sure on final cost but Id expect as you go past 550rwhp level FI will get cheaper. Up to then I recon NA is best.
ringram said:
Well, if you are talking fwhp.
Then thats about 480rwhp.
Or are you talking 600rwhp? In which case about 750fwhp.
Thats a hard ask for NA with a daily driver cam. Though there are plenty of 1000fwhp ls race engines. You need pricey valvetrain parts. Mine choked on stock lifters with a healthy street cam profile. Jesel, TD, Manton, PSI, Solid rollers etc need to be brought to bear.
500 cube engines might get you close, but cost mega.
Id think a budget 402 with centri, heads and cam would be best. Very close to Stevie's recipie in fact. TerryS's LS1 gets the same rwhp as my 7.2L NA with the same formula.
Then you dont need to go mental on the valve train, you can just use forged pistons and a decent rotating assembly and fair heads and cam.
Im not sure on final cost but Id expect as you go past 550rwhp level FI will get cheaper. Up to then I recon NA is best.
Richards coming over to the dark side at last by the look of it! Then thats about 480rwhp.
Or are you talking 600rwhp? In which case about 750fwhp.
Thats a hard ask for NA with a daily driver cam. Though there are plenty of 1000fwhp ls race engines. You need pricey valvetrain parts. Mine choked on stock lifters with a healthy street cam profile. Jesel, TD, Manton, PSI, Solid rollers etc need to be brought to bear.
500 cube engines might get you close, but cost mega.
Id think a budget 402 with centri, heads and cam would be best. Very close to Stevie's recipie in fact. TerryS's LS1 gets the same rwhp as my 7.2L NA with the same formula.
Then you dont need to go mental on the valve train, you can just use forged pistons and a decent rotating assembly and fair heads and cam.
Im not sure on final cost but Id expect as you go past 550rwhp level FI will get cheaper. Up to then I recon NA is best.

ringram said:
Nope. Always said ultimately forced induction will win out. But up to that point NA rules. That point is a lot higher up that most people think. My NA LS1 had better dyno results than a VXR500 for example 

With the emphasis being on A VXR500.
Most produced over 400 WHP, BO55's never ran well
You ever thought about being a politician, you're great at this misdirection stuff
Edited by crisisjez on Sunday 16th May 21:45
Cheapest is likely a forged, standard capacity, half decent heads and a medium sized single turbo with whatever bolt on goodies are required. That will be by far the easiest, as you can just play with the boost to meet your goals.
Oh...and pick an easy dyno
But it also boils down to the sort of power delivery you want, and the car can handle or make use of. All 600whp's arent the same.
A blower can do it too, but you need to be more specific on selection, and altering boost isnt quite as easy.
Oh...and pick an easy dyno

But it also boils down to the sort of power delivery you want, and the car can handle or make use of. All 600whp's arent the same.
A blower can do it too, but you need to be more specific on selection, and altering boost isnt quite as easy.
Gassing Station | HSV & Monaro | Top of Page | What's New | My Stuff



