Clutch Issues, What To Go For?
Clutch Issues, What To Go For?
Author
Discussion

after_shock

Original Poster:

8,751 posts

251 months

Wednesday 19th May 2010
quotequote all
My clutch problems are gradually getting worse unfortunately so I need a new one!

Admittedly ive only had the car out 6 times this year so far but everytime the problem is getting worse, it has only appeared aswell since the cam/re-map where done on it.

If driving a little bit hard the pedal goes very hard and tends to stick to the floor, ive not noticed any slipping in any of the gears so im not sure what part of the clutch system is on its way out.

Regardless I need to find a new one and find something that is going to be future proof, im going to forge the internals later this year and get everything internally exactly as I want it before going for the centri charger next year.

The LS7 clutch I dont think will take the power levels im ultimately seeking, circa 700ish so whats my options?

I think the ACT (if thats the correct name?) have been mentioned quite a bit, and Jez mentioned another make but any advice and what to look for would be very helpfull?

It must be driveable, I dont want one of these on off things that makes you stall all the time!!

drew ss

2,683 posts

215 months

Wednesday 19th May 2010
quotequote all
ringram has the clutch u want

gsd2000

11,515 posts

214 months

Wednesday 19th May 2010
quotequote all
stevieturbo recommends textralia

the americans seem to love Monster clutches at the moment

i have heard the ringrams clutch is very streetable and works very well with his 500rwhp

ringram

14,702 posts

279 months

Wednesday 19th May 2010
quotequote all
Lots of good feedback for the ACT stuff from various places smile

http://forums.corvetteforum.com/1572627488-post5.h...

Rated up to 1450ft/lb and SFI certified

All ACT LS series twin-disc kits include a CNC-machined and dynamically balanced flywheel to ensure smooth, trouble free installation and operation. Driver and spectator safety are top priority at ACT. Each assembly is tested and certified to meet SFI Spec 1.2 standards, which means that all XTREME twin-disc kits are legal for competition when SFI Spec 1.2 is required or recommended. Each XTREME kit comes complete with an official SFI sticker and a serial number as required for certification.

• SFI 1.2 approved
• Torque capacities from 850- 1450 lbs/ft of torque
• Available from street friendly to race ready

anonymous-user

85 months

Wednesday 19th May 2010
quotequote all
stevie has a centri blower so follow his advice. I can also recommend the Spec supertwin.

Edited by anonymous-user on Wednesday 19th May 20:46

after_shock

Original Poster:

8,751 posts

251 months

Wednesday 19th May 2010
quotequote all
So weve got so far:

Textralia
ACT
Spec
Monster

Anything specific I need to look out for in the kits, do I need to change the flywheel at the same time for example?

Cheers for the help.

S800VXR

5,877 posts

231 months

Wednesday 19th May 2010
quotequote all
after_shock said:
My clutch problems are gradually getting worse unfortunately so I need a new one!

Admittedly ive only had the car out 6 times this year so far but everytime the problem is getting worse, it has only appeared aswell since the cam/re-map where done on it.

If driving a little bit hard the pedal goes very hard and tends to stick to the floor, ive not noticed any slipping in any of the gears so im not sure what part of the clutch system is on its way out.

Regardless I need to find a new one and find something that is going to be future proof, im going to forge the internals later this year and get everything internally exactly as I want it before going for the centri charger next year.

The LS7 clutch I dont think will take the power levels im ultimately seeking, circa 700ish so whats my options?

I think the ACT (if thats the correct name?) have been mentioned quite a bit, and Jez mentioned another make but any advice and what to look for would be very helpfull?

It must be driveable, I dont want one of these on off things that makes you stall all the time!!
If your peddle is sticking down then all yr problem is is the fluid boiling in the slave! Been discussed to death on here and the only way to solve it is to regularly renew the fluid which is a PITA due to the location of the slave drain tube! Yr clutch sounds fine as its not slipping and the peddle staying down is a classic sign of the slave not releasing or failing to release. Get someone like the fish to properly bleed it for you and it will be fine again, also when you do need to change the clutch get a remote bleed line fitted so you can regularly bleed it clean.

after_shock

Original Poster:

8,751 posts

251 months

Wednesday 19th May 2010
quotequote all
Clutch fluid has been changed twice this year already, last time done by the fish and it instantly started doing it again with the pedal sticking down, its doing it more and more and doing it when driving less hard. Broadslide had the exact same thing and only fix was to change the clutch.

The build I will be doing over the winter will purely concentrate on the engine and I dont want anything (or the least amount of things) to crop up that need fixing whilst thats going on, the clutch will need doing desperately once I push the power on a bit more.

S800VXR

5,877 posts

231 months

Wednesday 19th May 2010
quotequote all
Fair play then, just get the remote bleed line fitted whilst the clutch is apart. Ive got a spec 3+ in mine, once I get it back IL say what its like to drive although I have read on LS1 that they need running in before they perform smoothly...?

after_shock

Original Poster:

8,751 posts

251 months

Wednesday 19th May 2010
quotequote all
So you have not tried yours yet then?

S800VXR

5,877 posts

231 months

Wednesday 19th May 2010
quotequote all
Suppose to be picking it up this weekend...... will call Mark tomorrow.

after_shock

Original Poster:

8,751 posts

251 months

Wednesday 19th May 2010
quotequote all
Good luck with it, hope you do get it back!

I may need to pick your brain with regards to forging the bottom end when you have a few mins aswell.

Magic919

14,590 posts

232 months

Thursday 20th May 2010
quotequote all
after_shock said:
Good luck with it, hope you do get it back this year!

I may need to pick your brain with regards to forging the bottom end when you have a few mins as well.
Is there any point if you're not building a stroker? Rods and pistons, aye, but crank?

I'm sure StevieT would be the best guy to advise.

MadMaxHSV

1,816 posts

229 months

Thursday 20th May 2010
quotequote all
Will add comment on the ACT soon also.
All I know for now is it works and the clutch pedal is a bit heavier...smile Once the cars fully on the road i'll post judgement.

stevieturbo

18,106 posts

278 months

Thursday 20th May 2010
quotequote all
Magic919 said:
after_shock said:
Good luck with it, hope you do get it back this year!

I may need to pick your brain with regards to forging the bottom end when you have a few mins as well.
Is there any point if you're not building a stroker? Rods and pistons, aye, but crank?

I'm sure StevieT would be the best guy to advise.
he likely means just rods and pistons

Fitting a standard stroke forged crank when there is nothing wrong with the std crank is just throwing money away

TerryS

1,382 posts

279 months

Thursday 20th May 2010
quotequote all
Just to throw another into the mix, my South Bend is very nice to drive


after_shock

Original Poster:

8,751 posts

251 months

Thursday 20th May 2010
quotequote all
Dont get me wrong if the budget allows id love to build a stroker but I seriously doubt it will so would imagine it will just be rods and pistons.