Will this Cam be too extreme?
Will this Cam be too extreme?
Author
Discussion

after_shock

Original Poster:

8,751 posts

251 months

Thursday 20th May 2010
quotequote all
My current cam is the following spec:

Duration at 050 inch Lift 212 int./218 exh.
Advertised Duration 265 int./271 exh.
Intake Valve Lift with Factory Rocker Arm Ratio 0.558 in.
Lobe Separation (degrees) 115

However im wanting to increase top end rpm power by quite a decent amount and also go for a better FI cam, have been recommended this one what do you think:

Duration at 050 inch Lift 239 int./243 exh.
Advertised Duration 289 int./293 exh.
Intake Valve Lift with Factory Rocker Arm Ratio 0.624 in.
Lobe Separation (degrees) 114

?? Cheers

gsd2000

11,515 posts

214 months

Thursday 20th May 2010
quotequote all
thats a big cam

after_shock

Original Poster:

8,751 posts

251 months

Thursday 20th May 2010
quotequote all
Had a feeling it would be, still not sure what numbers im looking at but thought it might be a bit big, is it too big tho!?

Im going to change the heads at the same time when do it this year as opposed to just changing the cam itself.

monaro5.7

7,337 posts

210 months

Thursday 20th May 2010
quotequote all
after_shock said:
Had a feeling it would be, still not sure what numbers im looking at but thought it might be a bit big, is it too big tho!?

Im going to change the heads at the same time when do it this year as opposed to just changing the cam itself.


Iam got a 223 cam and thats bigish laugh

if u type ur cam into u-tube u will get an idea of its idal and being reved u might even get a dyno car with the cam fitted.

gsd2000

11,515 posts

214 months

Thursday 20th May 2010
quotequote all
im no cam expert but i would have thought that on an ls2 to keep emissions legal you would want to stay below 230, i think blowers like a wide duration split aswell, and a fairly high LSA. Again im only going by what i have picked up over the internet so i could be wrong.

I would try to speak to a cam specialist and tell them your spec and get a custom grind.


Well_Fans

4,193 posts

255 months

Thursday 20th May 2010
quotequote all
one you've been recommended - be lucky to pass emissions tests anywhere in the world with that and don't think it'll idle very well either.

stevieturbo

18,106 posts

278 months

Thursday 20th May 2010
quotequote all
Depending on engine size, it will idle ok.

But it certainly wont be passing many emissions tests

ringram

14,702 posts

279 months

Thursday 20th May 2010
quotequote all
Hmm, In an LS2 Id be looking at 224/232-115 or similar that "should" be close to passing. Its basically what Gareth has in his now and his passed. There are a few blower cams around, just check out the specs and find something with the intake in the low 220 range.
If you go bigger emissions will fail and fuel economy will start to be noticeably bad.

stevieturbo

18,106 posts

278 months

Thursday 20th May 2010
quotequote all
Would do no harm to ask the likes of Lingenfelter. They would have plenty of experience, and offer a range of camshafts. Seeing as they offer full drive in drive out packages tnhat would need to meet all sorts of emissions criteria in the US, they would have plenty of experience

Interesting choice here.... even better considering the price

http://www.lingenfelter.com/mm5/merchant.mvc?Scree...

Or this....

massive split, very wide LSA, and monster lift !!

http://www.lingenfelter.com/mm5/merchant.mvc?Scree...

They still say it has a smooth idle though, which is a good sign for emissions etc

ringram

14,702 posts

279 months

Thursday 20th May 2010
quotequote all
The first one is almost an LS9 cam.... which is what Piers fitted to his...

stevieturbo

18,106 posts

278 months

Thursday 20th May 2010
quotequote all
If you read...they have actually discontinued their GT7, due to its similarity to the LS9 cam

They now just sell it in its place...which is some $200 cheaper.

gsd2000

11,515 posts

214 months

Thursday 20th May 2010
quotequote all
The ls9 cam looks like a bargin, less than $160.

scratchchin wonder how well it works in an n/a ls1?

stevieturbo

18,106 posts

278 months

Thursday 20th May 2010
quotequote all
The biggest point to note, is that Lingenfelter dont follow the bandwagon with their profiles.

The fact that a profile they developed years ago has found its way into mainstream production ( or damn close to it ) must speak volumes too.

ringram

14,702 posts

279 months

Thursday 20th May 2010
quotequote all
[quote=stevieturbo]If you read...they have actually discontinued their GT7, due to its similarity to the LS9 cam

They now just sell it in its place...which is some $200 cheaper.[/quote

biggrin I only read the cam spec's

But yeah, the GM cam is a bargain then! Designed to meet emissions..
Its actually an LS7 cam IIRC. LS7=LS9 cam. Lift is different due to rocker ratio.

stevieturbo

18,106 posts

278 months

Thursday 20th May 2010
quotequote all
What ratio do the LS9 use then ?

Could be tempted by one of those myself.

after_shock

Original Poster:

8,751 posts

251 months

Friday 21st May 2010
quotequote all
If anyones after an LS9 cam I will have one coming out of my engine later this year, only done a couple of thousand miles by then.

O.k I will E-mail Lingenfelter see what they come up with.

The big one above was recommended as a blower cam!

The main criteria is that the power band is moved higher up the rev range so no idea what to look out for in that respect.

Fuel economy im not too fussed about as dont use the car very often, emissions however I do need something that will pass (well actually I dont but it does always help) The idle needs to be usuable though.

after_shock

Original Poster:

8,751 posts

251 months

Friday 21st May 2010
quotequote all
Ive sent a mail to Lingenfelter.

Anyone got any other links to blower cams as im struggling to find any?

All the comp cams stuff is rather big in the new LSr range and I cant find anything else blower specific on that site.

MadMaxHSV

1,816 posts

229 months

Friday 21st May 2010
quotequote all
ringram said:
The first one is almost an LS9 cam.... which is what Piers fitted to his...
smile
So far can only say it idles fine. Let you know how it fairs...

after_shock

Original Poster:

8,751 posts

251 months

Friday 21st May 2010
quotequote all
MadMaxHSV said:
ringram said:
The first one is almost an LS9 cam.... which is what Piers fitted to his...



So far can only say it idles fine. Let you know how it fairs...


If its very similar spec to mine the idle will be just like normal, or almost. Top end power will fade away quite sharply though, although you are running a better charger with more boost than me so you probably wont notice!

Mid range is excellent with it though.

Let me know what you think of your new clutch if you dont mind!?

MadMaxHSV

1,816 posts

229 months

Friday 21st May 2010
quotequote all
after_shock said:
Let me know what you think of your new clutch if you dont mind!?
No problem smile Only used it to move the car around the driveway so far. Once i've finished up the fuel system it'll have it's first proper run.
Let you know.