FAO Ringram
Author
Discussion

gsd2000

Original Poster:

11,515 posts

214 months

Saturday 22nd May 2010
quotequote all
I've found you a nice "baby" Cam for your 440 hehe

http://partsworldperformance.com/ls_stage_3_camsha...

http://www.hotrod.com/techarticles/engine/hdrp_060...

Edited by gsd2000 on Saturday 22 May 11:46

ringram

14,702 posts

279 months

Saturday 22nd May 2010
quotequote all
Yeah that doesnt look too bad. Exhaust duration is interesting.

I would have liked to get this one.

HYDRAULIC ROLLER-Excellent top
end and high rpm power for race
style LS engines with aftermarket
rectangular port cylinder heads.
Hyd. Hyd. 2600 to 7200 54-472-11 293LRR HR14 293 309 243 259 .624 .624 114°

But I got this one instead. Close to the old specs, but a bit more exhaust duration.

HYDRAULIC ROLLER-Good street/
strip camshaft with wide range. Hyd. Hyd. 1900 to 7000 146-458-11 277LrR HR13 277 293 227 243 .614 .624 113°

gsd2000

Original Poster:

11,515 posts

214 months

Saturday 22nd May 2010
quotequote all
ringram said:
Yeah that doesnt look too bad. Exhaust duration is interesting.

I would have liked to get this one.

HYDRAULIC ROLLER-Excellent top
end and high rpm power for race
style LS engines with aftermarket
rectangular port cylinder heads.
Hyd. Hyd. 2600 to 7200 54-472-11 293LRR HR14 293 309 243 259 .624 .624 114°

But I got this one instead. Close to the old specs, but a bit more exhaust duration.

HYDRAULIC ROLLER-Good street/
strip camshaft with wide range. Hyd. Hyd. 1900 to 7000 146-458-11 277LrR HR13 277 293 227 243 .614 .624 113°
sounds good, what was your old spec then?

Do you run your otr all year round?

Would the cam that you like pass emissions in the UK?

gsd2000

Original Poster:

11,515 posts

214 months

Saturday 22nd May 2010
quotequote all
oh yeah have you seen this?

http://www.ls1tech.com/forums/generation-iv-extern...

Might be worth it for you or gareth instead of running a fast intake.

ringram

14,702 posts

279 months

Saturday 22nd May 2010
quotequote all
Id like what Brummie has. A Kinsler ITB manifold. But they are mega.
The Fast102 is good for the street. The Jenvey looks interesting. But it will need filtering and ETC control to work with the E38 ECU... The Harrop works, but they dont have an LS7 version. You have to use a cruddy adapter.

gsd2000

Original Poster:

11,515 posts

214 months

Saturday 22nd May 2010
quotequote all
Id like the jenveys would they would be a waste unless they were used on a high end build