Checking the BCM connections
Checking the BCM connections
Author
Discussion

AndiD

Original Poster:

147 posts

198 months

Thursday 27th May 2010
quotequote all
Hi guys.. still having massive problems with my Monaro cutting out.. happens every single journey now and Vauxhall haven't been able to come anywhere near to finding out what the problem is.

It's really getting me down now, as all I want to do is enjoy my new car, but it's not very safe to take out. It's a real stress and everybody I've tried has come up blank - mainly becasue they just say "we can't touch this without having all the diagnostics software"

I'm going to try to take it down to the fish asap if VX can't sort it beforehand (it's getting a free day to make the journey from leeds that's the problem.. plus it's a long journey for a car that can just stall at any time at 70 miles an hour!)

The fault codes it's bringing up are definately to do with the immobiliser, but from everyone I've spoken to, there's virtually no record of an immobiliser going wrong on a Monaro (in the UK anyway) so nobody knows what to do.

I want to check all the connections going into the BCM and anywhere else people might think it's worth fiddling in case there's some loose wire somewhere that just looses it's connection every so often, but I'm not sure how to get to the BCM

Am I right in thinking it's somewhere under the steering wheel where the tech2 port is? I've pulled down the fuse hatch and made sure they're all ok but can't see the BCM in there anywhere.

Any help or ideas very much appreciated

Andi

drew ss

2,683 posts

215 months

Thursday 27th May 2010
quotequote all
i thought someone recently said check the silver ring around the ignition make sure theres contact with the key and its clean

AndiD

Original Poster:

147 posts

198 months

Thursday 27th May 2010
quotequote all
drew ss said:
i thought someone recently said check the silver ring around the ignition make sure theres contact with the key and its clean


Did that.. no change

Wolfracer

2,074 posts

237 months

Thursday 27th May 2010
quotequote all
Bcm fuse is under the bonnet. Removing the bcm fuse does indeed kill the engine, but you can still turn it over etc. Have you jet washed the car recently? Would have to be serious water ingress to get to the fuses though...

DevilYellowCV8

745 posts

254 months

Thursday 27th May 2010
quotequote all
I've had a very similar problem. Do you have an aftermarket immobilser? If so, that's probably the cause.

It requires a re-flash of the BCM software and possibly re establishing the link to the PCM if there is a problem in that area.

Slaters Vauxhall in Colwyn Bay had the pleasure of doing mine a couple of weeks back and they seemed aware that immobilsers can cause these sort of problems. Might be worth giving them a call for advice. They also ended up having to strip the aftermarket immobilser out which only added to the pain in my wallet...




Edited by DevilYellowCV8 on Thursday 27th May 19:04

anonymous-user

85 months

Thursday 27th May 2010
quotequote all
Mine had all sorts of issues which were eventually traced to a connector block. Speak to mark at lsv8power. He fixed mine and knows a good autoelectrician