Is there a baby/child seat that fits in the back of Cerbera?

[mcgi6am3]

Hello all,
Need your help. Just picked up my new Cerbera and need to find a baby seat to fit into the back seats of the car.

Been to Halfords etc and nothing comes close to fitting. I've read a few posts and seen that TVR used to make one themselves - were these to fit into the back seats and if so, does anybody know where I can buy one. If not, are there any alternatives? The little one is 11 months old, so could do with one that lasts up to a few years old.

Many thanks for your help
Alex

[al 350i]

only option is wife in back seat, baby in front seat

[Gazzab]

Do a searc on 'recaro'.
The rear facing seats fit front only.
The recaro start (fwd facing) fits in the rear.

[mikeinsheffield]

I've not tried a rear facing baby seat - but agree with Gazzab that you would probably need to put a rear facing set in the front passenger seat (no worries about turning off the airbag, eh? )
I use the Recaro child seat in the rear - it fits in the passenger side, but I'm not sure it would fit behing the driver seat (especially with me driving!). The Recaro is a very good quality car seat, metal "chassis", fully adjustable so should last you for a few years as the child grows.

Good luck!

[5MUG]

We used to put a Britax car seat in the back (but that was about 6 years ago). We used a special tightener thing called mightly-tite or something similar to get the belt really tight as its v difficult in such a small place. I'm sure you will find one that fits, ask your friends with children if you can try theirs too!

Edited by 5MUG on Monday 31st May 19:46

[Dave_M]

The TVR seats fitted in the back onto a large metal bar through the floor, each was made (I think) in the same hide as the car hence mine is prussion blue

Maybe worth advertising in classifieds her and TVR CC?