Headers
Author
Discussion

mfp4073

Original Poster:

2,111 posts

205 months

Tuesday 1st June 2010
quotequote all
Apart from price and quality, whats the difference between buying a known brand of exhaust Header compaired to having one made up?
Do they all make the same power, or do made up ones produce less power as they have not been tested for power output.
I expect the same questions could be asked about the rest of the exhaust system.

ringram

14,702 posts

279 months

Tuesday 1st June 2010
quotequote all
[translation]How long is a piece of string[/translation]

mfp4073

Original Poster:

2,111 posts

205 months

Tuesday 1st June 2010
quotequote all
oop's that bad a question...eh

llcoolbc

339 posts

209 months

Tuesday 1st June 2010
quotequote all
I'm having the same conundrum..... buy a Wortec or similar "branded" headers or go somewhere like AAS for them at 1/3 of the price....anyone got any video clips with non-branded headers so we can have a listen?

007 VXR

64,187 posts

218 months

Tuesday 1st June 2010
quotequote all
mfp4073 said:
oop's that bad a question...eh
think the question has to start with money

how much do you want to spend

500 or 2.500 ??

Both will improve things

crisisjez

9,209 posts

236 months

Tuesday 1st June 2010
quotequote all
I think given that the cost of buying either a Monaro or VXR8 is getting lower all the time the percentage cost (of the value of the car) of some of the aftermarket products available is now starting to price them out of the market.
Regardless of how good they were I'd not spend up to 20% of the total worth of any car just on headers.

mfp4073

Original Poster:

2,111 posts

205 months

Tuesday 1st June 2010
quotequote all
OK,are custom made headers if made up by a decent company as good as a Branded header? let's be honest the design of the header must be dictated by the amout of space you have to fit them? or am I missing something...again!

crisisjez

9,209 posts

236 months

Tuesday 1st June 2010
quotequote all
mfp4073 said:
OK,are custom made headers if made up by a decent company as good as a Branded header? let's be honest the design of the header must be dictated by the amout of space you have to fit them? or am I missing something...again!


Can't see any reason why not.

Magic919

14,593 posts

232 months

Tuesday 1st June 2010
quotequote all
Headers vary in terms of sizing and topology. Aside from diameter there are long tube headers and shorties. Just having a label on the side does not affect performance.

I've got some Pacemaker headers on mine. They weren't a scary price.

gsd2000

11,515 posts

214 months

Tuesday 1st June 2010
quotequote all
Magic919 said:
Headers vary in terms of sizing and topology. Aside from diameter there are long tube headers and shorties. Just having a label on the side does not affect performance.

I've got some Pacemaker headers on mine. They weren't a scary price.
are pacemakers, mild steel? Also which cat's have you got on your r8?

V88Dicky

7,373 posts

214 months

Tuesday 1st June 2010
quotequote all
mfp4073 said:
OK,are custom made headers if made up by a decent company as good as a Branded header? let's be honest the design of the header must be dictated by the amout of space you have to fit them? or am I missing something...again!


Hi Jon. You're welcome to come out for a run in mine if you want. It now has the entire system made by AAS. Headers, cats and exhaust

ringram

14,702 posts

279 months

Tuesday 1st June 2010
quotequote all
Do a search for "auto exhaust science" loads of info on what makes a good exhaust there.
Also research merge headers, try-y, 4 into 1, long tubes. Exhaust tuning etc.
You will then form an idea of what you want based on how you want to drive the car.
You can then see who sells what etc.

Magic919

14,593 posts

232 months

Tuesday 1st June 2010
quotequote all
gsd2000 said:
Magic919 said:
Headers vary in terms of sizing and topology. Aside from diameter there are long tube headers and shorties. Just having a label on the side does not affect performance.

I've got some Pacemaker headers on mine. They weren't a scary price.
are pacemakers, mild steel? Also which cat's have you got on your r8?
Yes, they are mild steel. I had them ceramic coated. Rest of my system, inc cats, is KPM Auto - http://www.kpmauto.com/

MyM8V8

9,468 posts

226 months

Tuesday 1st June 2010
quotequote all
Here's one good piece of advice:

Don't buy Difillipo - they're st. (i.e. champagne prices for Ginger beer product)


Edited by MyM8V8 on Tuesday 1st June 16:00

mfp4073

Original Poster:

2,111 posts

205 months

Tuesday 1st June 2010
quotequote all
V88DICKY,
Hello there, so you finally did it then! I would be very interested in seeing the system you've had fitted, I'm away most of this month so maybe we can arrange something later on. Thanks for the offer. Did you have to get a re-map?

Regards John.

V88Dicky

7,373 posts

214 months

Tuesday 1st June 2010
quotequote all
mfp4073 said:
V88DICKY,
Hello there, so you finally did it then! I would be very interested in seeing the system you've had fitted, I'm away most of this month so maybe we can arrange something later on. Thanks for the offer. Did you have to get a re-map?

Regards John.


No re-map as of yet mate, but the cars running fine at the mo. Let me know when and where and I'll have a tootle on down to sunny Teeside thumbup

MadMaxHSV

1,816 posts

229 months

Tuesday 1st June 2010
quotequote all
MyM8V8 said:
Here's one good piece of advice:

Don't buy Difillipo - they're st. (i.e. champagne prices for Ginger beer product)
They're not that bad wink I quite like mine. The headers anyway (coated of course so they don't look crap after a bit of use)
Agree the rest of the system is below par

Monaro5.7

7,337 posts

210 months

Tuesday 1st June 2010
quotequote all
Here is the sound of my car with its headers and cats from AAS

www.youtube.com/watch?v=MqKM6BzuI9w

www.youtube.com/watch?v=5XSDjLmIYro

Has a Wortec cat back system but the center boxes have been removed

after_shock

8,751 posts

251 months

Tuesday 1st June 2010
quotequote all
Your welcome to look at mine aswell if you want anytime!

Basically the branded ones are made by an exhaust fabrication company exactly the same as the after market ones, id challenge the quality on the branded ones to be better in any area than the ones that have been made by AAS.

Ultimately the custom ones you can get done to any spec you want, as mentioned above get short, long or choose the size of the actual pipe work and what size cats they run into.

MyM8V8

9,468 posts

226 months

Wednesday 2nd June 2010
quotequote all
MadMaxHSV said:
MyM8V8 said:
Here's one good piece of advice:

Don't buy Difillipo - they're st. (i.e. champagne prices for Ginger beer product)
They're not that bad wink I quite like mine. The headers anyway (coated of course so they don't look crap after a bit of use)
Agree the rest of the system is below par
Well I don't know about yours, but the ones supplied to me (1.7/8") are press bent (contrary to the DF site promoting the advantges of mandrel bent tubes) and they are also hammered flat in places for clearance. I thought the pro's would avoid this (mass production) method at all costs.

The standard of welding also leaves a lot to be desired!! I suppose they will work better on a bigger blown motor though than 1.5/8".

They need to be coated due to them using 409 stainless, which isn't "stainless"! Anyway, once bitten twice shy, as they say.

I'd have to say I would go custom for the price next time. The boys at AAS seem to have a good rep'.