Getting the blasted wheels off!
Getting the blasted wheels off!
Author
Discussion

VXR8 Blue

Original Poster:

37 posts

201 months

Tuesday 1st June 2010
quotequote all
Thought it would be a good idea the bank holiday weekend to take the wheels off the R8 and give them a good clean and seal.. only problem was once i got the wheel nuts off i couldn't shift the wheel off the hub. Got one off with a good deal of cursing and brute force but i couldn't shift the others..

Am i missing something? or is this common to the R8?

Cheers

Edited by VXR8 Blue on Tuesday 1st June 23:44

well_fans

4,193 posts

255 months

Tuesday 1st June 2010
quotequote all
had same problem with the monaro few years back, a light wipe of copper grease between the wheel and the hub surface will cure the problem for the future ----- I do mean a light wipe and dont get it anywhere near brake surfaces etc obviously.

the_ferret82

25,627 posts

215 months

Tuesday 1st June 2010
quotequote all
common problem. take bolts off then kick the wheel to free it. and as previously said clean up the hub and then wipe with a bit of copper grease and refit.

VXR8 Blue

Original Poster:

37 posts

201 months

Wednesday 2nd June 2010
quotequote all
the_ferret82 said:
take bolts off then kick the wheel to free it.


Had a go at kicking, thought i was either going to knacker the car or myself.. but no luck so far but i'll give it another go seeing as it appears to be not that daft.......

the_ferret82

25,627 posts

215 months

Wednesday 2nd June 2010
quotequote all
VXR8 Blue said:
the_ferret82 said:
take bolts off then kick the wheel to free it.
Had a go at kicking, thought i was either going to knacker the car or myself.. but no luck so far but i'll give it another go seeing as it appears to be not that daft.......
mine where really stuck on when i first did mine.

with the car on stands i had to lay on my back by the side of the car then kick the top of the wheel the the bottom of both feet and then the bottom until it moved..

you wont break the wheel or hub doing it they take much more force when on the road. just make sure its jacked up safe

SimonV8ster

13,039 posts

259 months

Wednesday 2nd June 2010
quotequote all
Rubber mallet to might help, you can also bash it from the inside out then if you get under the car.

tattooboy

7,946 posts

209 months

Wednesday 2nd June 2010
quotequote all
Wheels can get really stuck on with a bit of rust, my advice to you is to put your car on axle stands then call your missus out and say you can't get the wheels off, when she bends over to have a nose, maybe comment that her backside is getting a little on the big side, then hey presto, all 4 wheels have been ripped off the car thumbup you may have a broken nose and 2 black eyes but you can then spend the rest of the day cleaning your wheels to your hearts content good luck

scarebus

858 posts

202 months

Wednesday 2nd June 2010
quotequote all
Jack car up, then wedge a crowbar under the tyre and lift up, then release pressure, up and down, repeat until she pops off the hub....

LuS1fer

43,569 posts

276 months

Wednesday 2nd June 2010
quotequote all
On my old Camaro, I used a piece of wood across the back of the wheel, a bit of kicking, a bit of weight on the wheels. I now use aluminium or copper grease on all the backs of my wheels.

ringram

14,702 posts

279 months

Wednesday 2nd June 2010
quotequote all
Violent kicking with boot heel works about 50% of the time.
The other 50% ive used a block of wood against the inside rim and a jolly nice small sledge hammer.
Just work around the rim with increasing violence. Never had any damage and always got the wheel off eventually.

Then yeah, +1 for copper grease. I use it on most bits and pieces along with a spray can of waxoyl to avoid rust etc.

MyM8V8

9,468 posts

226 months

Wednesday 2nd June 2010
quotequote all
Same problem on the GTS. You just have to persevere and keep working the bloody things. As Bob says, copper slip or vaseline on the hub when you reassemble.

Kick, rubber mallet and curse the bds, they will come off.

PS what seems to cause it is a mixture of the oxides from both wheel and hub swelling up into the (narrow) gap.

Edited by MyM8V8 on Wednesday 2nd June 16:37

MEATANDCHEESE

409 posts

198 months

Wednesday 2nd June 2010
quotequote all
Just to add to all the excellent advice I also keep one wheel nut on (Nearly off, but on a couple of turns if you see what I mean??) then when the wheel does eventually give it does not fly off and damage the alloy on the floor, wall, missus, you get the picture!

LuS1fer

43,569 posts

276 months

Wednesday 2nd June 2010
quotequote all
Incidentally the aluminium grease on ebay looks better as it's silver so doesn't look so crap.

after_shock

8,751 posts

251 months

Wednesday 2nd June 2010
quotequote all
Just take the nuts off and lower the car back down slowly on the jack until some weight is on it, they soon knock free!! Personally wouldnt try it on a nice car but did it on a shed a few years back that simply wouldnt release its wheel to me, hammers regardless of size wouldnt work so just lowered it till the weight did it for me.

VXR8 Blue

Original Poster:

37 posts

201 months

Wednesday 2nd June 2010
quotequote all
Thanks for all the advice, i'll be having another go when i get back from the south this weekend.....fingers crossed!!

MyM8V8

9,468 posts

226 months

Thursday 3rd June 2010
quotequote all
Just had a puncture on the work car today and had the same thing. I did curse and kick for about 10 minutes, it would not give at all.

I dropped the car on the deck undid the wheelnuts a turn and drove up and down a curb. That did it!

Tyre was knackered anyway. Not recommended for your pride and joy though!!!

ringram

14,702 posts

279 months

Thursday 3rd June 2010
quotequote all
Or take the nuts right off and do some autocross http://www.youtube.com/watch?v=jv4m41viy4I

Trailermasher

730 posts

253 months

Friday 4th June 2010
quotequote all
tattooboy said:
Wheels can get really stuck on with a bit of rust, my advice to you is to put your car on axle stands then call your missus out and say you can't get the wheels off, when she bends over to have a nose, maybe comment that her backside is getting a little on the big side, then hey presto, all 4 wheels have been ripped off the car thumbup you may have a broken nose and 2 black eyes but you can then spend the rest of the day cleaning your wheels to your hearts content biggrin good luck
roflmfao

doleboy

747 posts

248 months

Friday 4th June 2010
quotequote all
Trailermasher said:
tattooboy said:
Wheels can get really stuck on with a bit of rust, my advice to you is to put your car on axle stands then call your missus out and say you can't get the wheels off, when she bends over to have a nose, maybe comment that her backside is getting a little on the big side, then hey presto, all 4 wheels have been ripped off the car thumbup you may have a broken nose and 2 black eyes but you can then spend the rest of the day cleaning your wheels to your hearts content good luck



roflmfao


When asked "Does my bum look big in this", don't hesitate or laugh




Edited by doleboy on Friday 4th June 20:30