My car is back.. and has had a few modifications ;)
Discussion
As you may remember I had a ticking noise coming from my engine, and have now had it sorted at Monkfish and the car is back, so I thought I'd post an update.
And MAN is it back! The problem was a bizarre one - a screw (nothing to do with the engine) stuck in the cam causing the ticking noise. With the engine apart and the cam knackered Roger gave me the choice to upgrade to a Monkfish magic cam (and remap) rather than go standard, and having explained all the benefits to me it seemed daft not to. A similar conversation about the clutch and it seemed equally daft not to stick an LS7 in there.
So with all the work done I now have the car back, and the difference is amazing, both in terms of performance and the noise. It's now got more of an uneven burble at low rpm, more 'traditional V8 muscle', but now with an added whistle from the supercharger even at minimal revs - sounds very similar to a turbocharger, until you give it some right-foot and you then get the usual supercharger and V8 noise. It's even better and even more addictive than before!
Performance is better too, the cam has made a big difference. From a driving point of view the car feels a bit smoother accelerating through lower revs, but the biggest difference is at the top end - where the car used to tail off slightly after 5000rpm, it now keeps pushing hard right up to the redline. Roger reckons I'm probably running around 400-410rwhp now, and I'm going to get it dyno'd at some point to see (will post results as soon as I have them, though I'm unlikely to get the chance to have it done any time soon due to work commitments - maybe a month or so).
The biggest improvement for me though is that I've not only got added (and more usable) power, but also some safety to the engine. This is apparently the first time Monkfish have fitted the cam to a non-intercooled supercharged car, and the tests have shown that not only have I gained power, but also reduced temps by around 20%, which is at least as good as you'd expect from an intercooler. This is very re-assuring for me, and the fact that I also have added performance benefits along with it is just a huge bonus.
For anyone else with a non-intercooled FI setup, I would definitely recommend speaking to Monkfish about the cam upgrade as an alternative (or additional) option to an intercooler.
So now I have my car back and I'm a very happy bunny. What started as taking the car in to rectify a fault has ended up being the addition of a few very welcome upgrades, the phrase involving 'silver linings' springs to mind - and yes you were all right about the modding bug, I wonder what'll be next?!
Thanks to Monkfish for a great job.
And MAN is it back! The problem was a bizarre one - a screw (nothing to do with the engine) stuck in the cam causing the ticking noise. With the engine apart and the cam knackered Roger gave me the choice to upgrade to a Monkfish magic cam (and remap) rather than go standard, and having explained all the benefits to me it seemed daft not to. A similar conversation about the clutch and it seemed equally daft not to stick an LS7 in there.
So with all the work done I now have the car back, and the difference is amazing, both in terms of performance and the noise. It's now got more of an uneven burble at low rpm, more 'traditional V8 muscle', but now with an added whistle from the supercharger even at minimal revs - sounds very similar to a turbocharger, until you give it some right-foot and you then get the usual supercharger and V8 noise. It's even better and even more addictive than before!
Performance is better too, the cam has made a big difference. From a driving point of view the car feels a bit smoother accelerating through lower revs, but the biggest difference is at the top end - where the car used to tail off slightly after 5000rpm, it now keeps pushing hard right up to the redline. Roger reckons I'm probably running around 400-410rwhp now, and I'm going to get it dyno'd at some point to see (will post results as soon as I have them, though I'm unlikely to get the chance to have it done any time soon due to work commitments - maybe a month or so).
The biggest improvement for me though is that I've not only got added (and more usable) power, but also some safety to the engine. This is apparently the first time Monkfish have fitted the cam to a non-intercooled supercharged car, and the tests have shown that not only have I gained power, but also reduced temps by around 20%, which is at least as good as you'd expect from an intercooler. This is very re-assuring for me, and the fact that I also have added performance benefits along with it is just a huge bonus.
For anyone else with a non-intercooled FI setup, I would definitely recommend speaking to Monkfish about the cam upgrade as an alternative (or additional) option to an intercooler.
So now I have my car back and I'm a very happy bunny. What started as taking the car in to rectify a fault has ended up being the addition of a few very welcome upgrades, the phrase involving 'silver linings' springs to mind - and yes you were all right about the modding bug, I wonder what'll be next?!

Thanks to Monkfish for a great job.
S800VXR said:
Not knocking you as it sounds like a nice drive now but.... whilst it was apart why did you not drop some forged slugs in there?
I thought about it and obviously I could see it would have made sense, but having committed to doing loads of work on the house I was really pushing it with what I could realistically spend on the car, as every penny I was transferring was from the house budget and really I ended up right at my limit! Just bad timing, had this happened say in 6 months time then I'd have gone for forged without hesitation. But I'm hoping that with the extra safety the cam will give there perhaps isn't now the same urgency for going forged, though I'm not ruling out doing it some time in the near future 
Yeah, thats been spoken about on here for years 
Cam will reduce boost as the valves arnt shut for as long, which will reduce intake pressure and therefore heat... while also increasing the actual airmass in the engine. Good to see you are a believer.
Now just to get the rest of the slow types to come up to speed. Maybe in a few more years.

Cam will reduce boost as the valves arnt shut for as long, which will reduce intake pressure and therefore heat... while also increasing the actual airmass in the engine. Good to see you are a believer.
Now just to get the rest of the slow types to come up to speed. Maybe in a few more years.
ringram said:
Yeah, thats been spoken about on here for years 
Cam will reduce boost as the valves arnt shut for as long, which will reduce intake pressure and therefore heat... while also increasing the actual airmass in the engine. Good to see you are a believer.
Now just to get the rest of the slow types to come up to speed. Maybe in a few more years.
i will be doing pistons and cam at the end of the year 
Cam will reduce boost as the valves arnt shut for as long, which will reduce intake pressure and therefore heat... while also increasing the actual airmass in the engine. Good to see you are a believer.
Now just to get the rest of the slow types to come up to speed. Maybe in a few more years.

O/P glad you got your car back


007 VXR said:
ringram said:
Yeah, thats been spoken about on here for years 
Cam will reduce boost as the valves arnt shut for as long, which will reduce intake pressure and therefore heat... while also increasing the actual airmass in the engine. Good to see you are a believer.
Now just to get the rest of the slow types to come up to speed. Maybe in a few more years.
i will be doing pistons and cam at the end of the year 
Cam will reduce boost as the valves arnt shut for as long, which will reduce intake pressure and therefore heat... while also increasing the actual airmass in the engine. Good to see you are a believer.
Now just to get the rest of the slow types to come up to speed. Maybe in a few more years.

O/P glad you got your car back



S800VXR said:
007 VXR said:
ringram said:
Yeah, thats been spoken about on here for years 
Cam will reduce boost as the valves arnt shut for as long, which will reduce intake pressure and therefore heat... while also increasing the actual airmass in the engine. Good to see you are a believer.
Now just to get the rest of the slow types to come up to speed. Maybe in a few more years.
i will be doing pistons and cam at the end of the year 
Cam will reduce boost as the valves arnt shut for as long, which will reduce intake pressure and therefore heat... while also increasing the actual airmass in the engine. Good to see you are a believer.
Now just to get the rest of the slow types to come up to speed. Maybe in a few more years.

O/P glad you got your car back




just pistons and cam
looking for 550rwhp 007 VXR said:
S800VXR said:
007 VXR said:
ringram said:
Yeah, thats been spoken about on here for years 
Cam will reduce boost as the valves arnt shut for as long, which will reduce intake pressure and therefore heat... while also increasing the actual airmass in the engine. Good to see you are a believer.
Now just to get the rest of the slow types to come up to speed. Maybe in a few more years.
i will be doing pistons and cam at the end of the year 
Cam will reduce boost as the valves arnt shut for as long, which will reduce intake pressure and therefore heat... while also increasing the actual airmass in the engine. Good to see you are a believer.
Now just to get the rest of the slow types to come up to speed. Maybe in a few more years.

O/P glad you got your car back




just pistons and cam
looking for 550rwhp 
gsd2000 said:
007 VXR said:
S800VXR said:
007 VXR said:
ringram said:
Yeah, thats been spoken about on here for years 
Cam will reduce boost as the valves arnt shut for as long, which will reduce intake pressure and therefore heat... while also increasing the actual airmass in the engine. Good to see you are a believer.
Now just to get the rest of the slow types to come up to speed. Maybe in a few more years.
i will be doing pistons and cam at the end of the year 
Cam will reduce boost as the valves arnt shut for as long, which will reduce intake pressure and therefore heat... while also increasing the actual airmass in the engine. Good to see you are a believer.
Now just to get the rest of the slow types to come up to speed. Maybe in a few more years.

O/P glad you got your car back




just pistons and cam
looking for 550rwhp 

will probs leave boost at 9psi
007 VXR said:
Moriascapula said:
007 VXR said:
sorry for the hijack OP 

that's fine, I said what I wanted to and am more than happy for this to progress onto related subjects 

you will just end up setting up a direct debt to the fish

Bonnie and Clyde said:
007 VXR said:
wonder if he would back date the points
Nice one Redwings
glad your happy with the car
I love going to the fish
So Santa Pod Saturday ???? Yeah ????
Yeah Dave!!! Get yourself down to Santa Pod this weekend. I will be there on the Sunday only. I also have a spare stand pass for your car if you need one - I have one for the show and shine stand and one for the VXR online stand too.
Glad to read about the cam change on a non intercooled SC, thought I was the only one with it done still!
Admittedly I didnt go for the magic cam and have no idea what spec it is so cant really compare. I did go for a small cam and a re-map with the manifolds done, it was done up to 429rwhp but unfortunately the reduction in temps that the cam gave where soon back when this power level was reached.
My next step after changing a knackered clutch will be to forge the bottom end, then we can see where to go from that point.
PS good move changing the clutch, it wouldnt have lasted long!!
Admittedly I didnt go for the magic cam and have no idea what spec it is so cant really compare. I did go for a small cam and a re-map with the manifolds done, it was done up to 429rwhp but unfortunately the reduction in temps that the cam gave where soon back when this power level was reached.
My next step after changing a knackered clutch will be to forge the bottom end, then we can see where to go from that point.
PS good move changing the clutch, it wouldnt have lasted long!!
Gassing Station | HSV & Monaro | Top of Page | What's New | My Stuff



