Discussion
Hi all,
My 6.0 Monaro's developed a very annoying plasticy creaking sound which seems to be coming from the gear stick area. It's particularly noticeable in 3rd and 6th gear for some reason. When in 6th, pushing down on the leather boot around the stick toward the rear of the shaft seems to stop / minimise it somewhat. 4th and 5th gear seem fine and in 1st and 2nd the car tends to be making sufficient noise and progress that I wouldn't hear a thing anyway!
Does anyone have any ideas about what it might be? Is there any kind of guide someone can give about getting access to that area (trim removal)?
Rattles and trim issues drive me bloody nuts, can't stand the car being less than perfect. I'll automatically tune in to any issues.
Any help very much appreciated!
Ken
My 6.0 Monaro's developed a very annoying plasticy creaking sound which seems to be coming from the gear stick area. It's particularly noticeable in 3rd and 6th gear for some reason. When in 6th, pushing down on the leather boot around the stick toward the rear of the shaft seems to stop / minimise it somewhat. 4th and 5th gear seem fine and in 1st and 2nd the car tends to be making sufficient noise and progress that I wouldn't hear a thing anyway!
Does anyone have any ideas about what it might be? Is there any kind of guide someone can give about getting access to that area (trim removal)?
Rattles and trim issues drive me bloody nuts, can't stand the car being less than perfect. I'll automatically tune in to any issues.
Any help very much appreciated!
Ken
the_ferret82 said:
with i title like that i near said go see a doctor
from what you have described i would say you have a ripper shifter fitted. mine does the same and i just ignore it as its a feature of the car.
i can tell you its not the trim had that all off. believe it to be the shifter its self
from what you have described i would say you have a ripper shifter fitted. mine does the same and i just ignore it as its a feature of the car.
i can tell you its not the trim had that all off. believe it to be the shifter its self
No rip shifter sadly, I've heard people on the Internets complaining of that one :/
I think from memory there is just one screw which secures the trim which is behind the rubber matt in the forward tray. Apart from that it all un clips. Then I think there is more screws or clips around the periphery of the gear lever cover. The gear lever then un bolts from the shifter.
Mine makes a raspy buzzing noise. The basic problem is a lot of vibration is transmitted from the rotating gear assemblies through the shift mechanism to the gear lever. What actually rattles is a mystery to me. I have a second shifter which I have set up with a small motor with out of balance weight. Certainly shakes it but it doesn't audibly rattle. Only does this in the car where the vibration is much more complex. For example you can feel the V8 firing order throb through it.
I don't know if VXR8s are better?
Mine makes a raspy buzzing noise. The basic problem is a lot of vibration is transmitted from the rotating gear assemblies through the shift mechanism to the gear lever. What actually rattles is a mystery to me. I have a second shifter which I have set up with a small motor with out of balance weight. Certainly shakes it but it doesn't audibly rattle. Only does this in the car where the vibration is much more complex. For example you can feel the V8 firing order throb through it.
I don't know if VXR8s are better?
I would start with some leather cleaner and coat the leather gater, if that does'nt work try and remove centre console trim, then use grease/vaseline and coat all the retaining tabs. Failing that I would remove the gear nob, do not twist it, it comes straight off with force! then put some silicon sealant on the gear stick and put the gear nob back on.
Mine has a ripshift fitted and is very quiet!
Mine has a ripshift fitted and is very quiet!
Huge thanks for everyone taking the time to respond
much appreciated! I'll consider the suggestions and get stuck in on Saturday. Cheers for the hints on trim removal. Will also be tackling my creaking drivers seat back, that's a more commonly encounter issue with white cheap creaky plastic in the seat. I've actually had that fixed before a year ago :/
I never seem to have time to make cars go quicker, I spend the time making good build quality issues
At least slabs of dash trim don't fly off under acceleration like with my old vx220.
much appreciated! I'll consider the suggestions and get stuck in on Saturday. Cheers for the hints on trim removal. Will also be tackling my creaking drivers seat back, that's a more commonly encounter issue with white cheap creaky plastic in the seat. I've actually had that fixed before a year ago :/ I never seem to have time to make cars go quicker, I spend the time making good build quality issues
At least slabs of dash trim don't fly off under acceleration like with my old vx220.
rocklandboy said:
the_ferret82 said:
with i title like that i near said go see a doctor 
I always get a sweaty knob when driving my Ro, not sure if it’s to do with the excitement of driving the beast or heat transfer up the gear stick
i get around this problem by having mrs007 as a co pilot 
I always get a sweaty knob when driving my Ro, not sure if it’s to do with the excitement of driving the beast or heat transfer up the gear stick



Gassing Station | HSV & Monaro | Top of Page | What's New | My Stuff


