Discussion
Cheers boys
I'm pleased with how they turned out and think it goes with the rest of the interior.
Like I said they're a PITA to get in there. I cut the fibre glass away under the dark blue bit of the dash where there was a couple of air vents and glassed in a recess for the gauges to sit back into. Problem is, you can't retrim that bit of the dash without removing the windscreen. So its at an interim stage at the moment, patched with dark blue leathette. Retrim will be later rather than sooner
Pods are just cheap plastic rubbish off ebay which I covered in magnolia leatherette. Picked up electrical power plus back lighting from the stereo wiring.
Rich.
Like I said they're a PITA to get in there. I cut the fibre glass away under the dark blue bit of the dash where there was a couple of air vents and glassed in a recess for the gauges to sit back into. Problem is, you can't retrim that bit of the dash without removing the windscreen. So its at an interim stage at the moment, patched with dark blue leathette. Retrim will be later rather than sooner

Pods are just cheap plastic rubbish off ebay which I covered in magnolia leatherette. Picked up electrical power plus back lighting from the stereo wiring.
Rich.
Gauges came from Speedy Cables in two separate orders. Firstly the oil temp and battery, they wouldn't put the TVR logo on these as at the time TVR were still going.
They did the supercharger gauge last year for me, looks superb but it took ages to get it out of them and even then they'd given it the wrong range
Rich
They did the supercharger gauge last year for me, looks superb but it took ages to get it out of them and even then they'd given it the wrong range

Rich
Gassing Station | Cerbera | Top of Page | What's New | My Stuff







