New clutch
Author
Discussion

gsd2000

Original Poster:

11,515 posts

214 months

Sunday 13th June 2010
quotequote all
Heres another clutch which could be used

http://www.ls1gto.com/forums/showthread.php?t=3579...

Stolen from ls1gto

LOOKING FOR A CLUTCH THAT HOLDS YET DOESNT BREAK THE BANK???? THEN HERE IT IS!

Street Slayer package includes flywheel ,HD pressure plate,and six puck disk,for better holding and abuse than the ls7. This clutch came about from trying to get a GOOD QUALITY clutch for a good price YET hold more than the others in its price range. So Hendrix looked at the ls7 and figured, Yea its a good clutch but i can do one better and not break the bank. and here is what you get:

Retail

$599.99

MyM8V8

9,468 posts

226 months

Sunday 13th June 2010
quotequote all
I have an old JCB 3 with a Ford 4D in it. I has a clutch that looks identical to that. Wait and see what a difference a light two plate makes!

gsd2000

Original Poster:

11,515 posts

214 months

Sunday 13th June 2010
quotequote all
MyM8V8 said:
I have an old JCB 3 with a Ford 4D in it. I has a clutch that looks identical to that. Wait and see what a difference a light two plate makes!
i know i cant wait bounce

i just thought i'd post up as it looks like a possible alternative to the ls7

granada203028

1,500 posts

228 months

Sunday 13th June 2010
quotequote all
Well the friction disk is an interesting design. Looks like the large gaps help cooling at the expense of life.

Really all these single plate designs are tinkering around the edges as they don't significantly increase the friction contact area and hence thermal inertia. So twin plate must surely be the only way to go.

ringram

14,702 posts

279 months

Sunday 13th June 2010
quotequote all
The cermanic puck might grab like gordon brown grabs to power. You want organic in a daily driver.
When are you getting yours installed mate!

stevieturbo

18,106 posts

278 months

Sunday 13th June 2010
quotequote all
granada203028 said:
Well the friction disk is an interesting design. Looks like the large gaps help cooling at the expense of life.

Really all these single plate designs are tinkering around the edges as they don't significantly increase the friction contact area and hence thermal inertia. So twin plate must surely be the only way to go.
interesting ? It looks the same as virtually every other paddle clutch for the LS, and many other engines.

Nothing new whatsoever. It looks the same as my 5 year old Textralia in fact. And even it follows typical design.

Twin is massive overkill unless making lots of power. And usually easily twice the price.
A good single will work very very well for most people. I had a little over 10k on my Tex single when I changed it, and it was only just fully bedded in at that point. Lots of racing and abuse in that milage, a few traffic jams, and multiple back to back very low 10s runs.
Cant say bad at that !

I only changed because I get paranoid when things work so well, for so long lol plus their new ExoSkel just looked so nice.

MyM8V8

9,468 posts

226 months

Sunday 13th June 2010
quotequote all
ringram said:
The cermanic puck might grab like gordon brown grabs to power. You want organic in a daily driver.
When are you getting yours installed mate!
No need to mention that tt. We fked him off!

stevieturbo

18,106 posts

278 months

Sunday 13th June 2010
quotequote all
ringram said:
The cermanic puck might grab like gordon brown grabs to power. You want organic in a daily driver.
When are you getting yours installed mate!
The OZ700 which has a friction disc identical in appearance, slips just like a normal clutch when you want it too.

People really do have misconceptions about some paddle clutches. Even the iron disc Spec 4 I used for about 2 weeks really did drive very very smoothly !!
Although in a field, slipping to get traction was awkward lol On the road it was fine.


I wouldnt be surprised if the clutch on sale is just an LS7 cover, with a paddle friction plate.

gsd2000

Original Poster:

11,515 posts

214 months

Sunday 13th June 2010
quotequote all
ringram said:
The cermanic puck might grab like gordon brown grabs to power. You want organic in a daily driver.
When are you getting yours installed mate!
fingers crossed everything will be sorted in around 5 weeks.

raving

1,183 posts

221 months

Monday 14th June 2010
quotequote all
Textralia

MyM8V8

9,468 posts

226 months

Monday 14th June 2010
quotequote all
stevieturbo said:
granada203028 said:
Well the friction disk is an interesting design. Looks like the large gaps help cooling at the expense of life.

Really all these single plate designs are tinkering around the edges as they don't significantly increase the friction contact area and hence thermal inertia. So twin plate must surely be the only way to go.
interesting ? It looks the same as virtually every other paddle clutch for the LS, and many other engines.

Nothing new whatsoever. It looks the same as my 5 year old Textralia in fact. And even it follows typical design.

Twin is massive overkill unless making lots of power. And usually easily twice the price.
A good single will work very very well for most people. I had a little over 10k on my Tex single when I changed it, and it was only just fully bedded in at that point. Lots of racing and abuse in that milage, a few traffic jams, and multiple back to back very low 10s runs.
Cant say bad at that !

I only changed because I get paranoid when things work so well, for so long lol plus their new ExoSkel just looked so nice.
It won't be overkill at all when it cures that aweful clutch pedal sticking to the firewall as well. Plus a nice light pedal effort.

MadMaxHSV

1,816 posts

229 months

Monday 14th June 2010
quotequote all
MyM8V8 said:
stevieturbo said:
granada203028 said:
Well the friction disk is an interesting design. Looks like the large gaps help cooling at the expense of life.

Really all these single plate designs are tinkering around the edges as they don't significantly increase the friction contact area and hence thermal inertia. So twin plate must surely be the only way to go.
interesting ? It looks the same as virtually every other paddle clutch for the LS, and many other engines.

Nothing new whatsoever. It looks the same as my 5 year old Textralia in fact. And even it follows typical design.

Twin is massive overkill unless making lots of power. And usually easily twice the price.
A good single will work very very well for most people. I had a little over 10k on my Tex single when I changed it, and it was only just fully bedded in at that point. Lots of racing and abuse in that milage, a few traffic jams, and multiple back to back very low 10s runs.
Cant say bad at that !

I only changed because I get paranoid when things work so well, for so long lol plus their new ExoSkel just looked so nice.
It won't be overkill at all when it cures that aweful clutch pedal sticking to the firewall as well. Plus a nice light pedal effort.
Got your ACT in yet Gareth?

Mines feeling pretty good so far smile

MyM8V8

9,468 posts

226 months

Monday 14th June 2010
quotequote all
MadMaxHSV said:
MyM8V8 said:
stevieturbo said:
granada203028 said:
Well the friction disk is an interesting design. Looks like the large gaps help cooling at the expense of life.

Really all these single plate designs are tinkering around the edges as they don't significantly increase the friction contact area and hence thermal inertia. So twin plate must surely be the only way to go.
interesting ? It looks the same as virtually every other paddle clutch for the LS, and many other engines.

Nothing new whatsoever. It looks the same as my 5 year old Textralia in fact. And even it follows typical design.

Twin is massive overkill unless making lots of power. And usually easily twice the price.
A good single will work very very well for most people. I had a little over 10k on my Tex single when I changed it, and it was only just fully bedded in at that point. Lots of racing and abuse in that milage, a few traffic jams, and multiple back to back very low 10s runs.
Cant say bad at that !

I only changed because I get paranoid when things work so well, for so long lol plus their new ExoSkel just looked so nice.
It won't be overkill at all when it cures that aweful clutch pedal sticking to the firewall as well. Plus a nice light pedal effort.
Got your ACT in yet Gareth?

Mines feeling pretty good so far smile
As soon as the Fish have got the motor back together it will get installed. We will be awaiting a cam, I fear.

stevieturbo

18,106 posts

278 months

Monday 14th June 2010
quotequote all
MyM8V8 said:
stevieturbo said:
granada203028 said:
Well the friction disk is an interesting design. Looks like the large gaps help cooling at the expense of life.

Really all these single plate designs are tinkering around the edges as they don't significantly increase the friction contact area and hence thermal inertia. So twin plate must surely be the only way to go.
interesting ? It looks the same as virtually every other paddle clutch for the LS, and many other engines.

Nothing new whatsoever. It looks the same as my 5 year old Textralia in fact. And even it follows typical design.

Twin is massive overkill unless making lots of power. And usually easily twice the price.
A good single will work very very well for most people. I had a little over 10k on my Tex single when I changed it, and it was only just fully bedded in at that point. Lots of racing and abuse in that milage, a few traffic jams, and multiple back to back very low 10s runs.
Cant say bad at that !

I only changed because I get paranoid when things work so well, for so long lol plus their new ExoSkel just looked so nice.
It won't be overkill at all when it cures that aweful clutch pedal sticking to the firewall as well. Plus a nice light pedal effort.
Ive never suffered any of those problems...so cant say.

MyM8V8

9,468 posts

226 months

Monday 14th June 2010
quotequote all
stevieturbo said:
MyM8V8 said:
stevieturbo said:
granada203028 said:
Well the friction disk is an interesting design. Looks like the large gaps help cooling at the expense of life.

Really all these single plate designs are tinkering around the edges as they don't significantly increase the friction contact area and hence thermal inertia. So twin plate must surely be the only way to go.
interesting ? It looks the same as virtually every other paddle clutch for the LS, and many other engines.

Nothing new whatsoever. It looks the same as my 5 year old Textralia in fact. And even it follows typical design.

Twin is massive overkill unless making lots of power. And usually easily twice the price.
A good single will work very very well for most people. I had a little over 10k on my Tex single when I changed it, and it was only just fully bedded in at that point. Lots of racing and abuse in that milage, a few traffic jams, and multiple back to back very low 10s runs.
Cant say bad at that !

I only changed because I get paranoid when things work so well, for so long lol plus their new ExoSkel just looked so nice.
It won't be overkill at all when it cures that aweful clutch pedal sticking to the firewall as well. Plus a nice light pedal effort.
Ive never suffered any of those problems...so cant say.
Not bad for a Ford!;)