wedge veneers

[HOTTY]

not many left

2 full sets for the 350/390

1 set for 400 (heater controls on the right)

no material left at all, the last piece used was to make a new stlye main dash for GV but its not worked out, so he will be disappointed !

Question ?

Has everybody done having new veneers ? as it would only be worth running more if there was at least 7/8 folks for each type.

HOTTY

[lancia4wd]

Hotty,

Can i bagsie the 400 set please, very pleased with the others.

Regards


Nick

[HOTTY]

Nick

1 set sold to the man with many cars......please to see most are wedges , even if some are up for sale

post a pic of you dash of your new 400se and I will check the hand before I post off to you.

Hotty

[GV]

Don't forget mine otherwise you may wake up one morning and find one of the heads from you engine inside your bed.....!!

[HOTTY]

Andy /GV
OH CRAP............I am expecting a engine in my bed as the last piece used was to make the dash you wanted.
I had the call Saturday on the way to Brid, the cut outs damaged the veneer too bad to use,
as these requests for one off veneers carry the same warning that it may happen, unfortunately there is nothing i can do.

If I get rid of all other the veneers that are outstanding and get some more interest in the 400/350/390
I will have yours made. Promise.
As I neither what concrete boots .

HOTTy

[Pilo-Wedgebits]

I'd sleep with one eye open

[digga951]

Hello,

Do you have a 350 set to sell? Round clock, small glove box panel (not sure of size - 80 x 400 sound about right?).

Thanks,

Dan.

[HOTTY]

Hello Digga

Yes I have two set left , each set comprises of the main dash ,centre console and the glove box to suit the size you have noted (i can confirm the size tomorrow).If you are interested i can send a small sample but most, if not all have been happy with the veneers received the past.

HOTTY

[digga951]

Fantastic. Put my name down for a set then please. No need for a sample as I'm sure they will be just fine.

I can double check any measurements if necessary.

Thanks again,

Dan.

[HOTTY]

Great Digga , if you email you home address i will send them this week and you can check against you dash before payment.

HOTTY




Only one set left !

[JVaughan]

Interested in 400 SE ones if you plan on making somemore.. Mine has cracked and split. its still serviceable, but to give the car some finishing touches, It needs to be replaced

[carob]

Mine are very good, now i know what the plastic is for,

Cheers Stephen,Cheque in the post.

Rob

[Waynester]

carob said:

Mine are very good, now i know what the plastic is for,

Cheers Stephen,Cheque in the post.

Rob

2nd that, they are excellent, but I also didn't realize they were plastic covered. Just need to sort fitting them properly now!





Rob, did you get an email from me?

Edited by Waynester on Monday 14th June 01:16

[pedder]

Hi how much are you asking for a set.Thats if you have any left for the 390 cheers Mark

[Dave Meredith]

Hotty

I've got a 350i. If you've still got a set left for this car I would be interested.

Dave

[carob]

Waynester said:

carob said:

Mine are very good, now i know what the plastic is for,

Cheers Stephen,Cheque in the post.

Rob

2nd that, they are excellent, but I also didn't realize they were plastic covered. Just need to sort fitting them properly now!








Rob, did you get an email from me?

Edited by Waynester on Monday 14th June 01:16

Wayne YHM Mate.

Rob

[lancia4wd]

Thanks Hotty,

I'll send you the picture by mail.

I now have three dashboards scattered around my house, still a bit confused by the number of backing plates on the cars and if i should stick it to the back of the old veneer plate or dump that as well.

I was still trying to sort some alloy clock surrounds and or mount my dials and controls on the outside

If i want to sell my cars i gotta get them in soon

Regards

Nick

[digga951]

HOTTY said:

Great Digga , if you email you home address i will send them this week and you can check against you dash before payment.

HOTTY

Email sent :-)

[HOTTY]

Sorry about the delay in getting back

The two veneer sets i had left for the 350/390 were promised on the night

these will be sent to K4000JB/james and Digga/dan (if all goes well this week)

I have no more............but

we have 4 folks possibly interest so far, as i may be able to get the 400se dash run with the 350/390
The cost will be the same for both types at £60 including delivery (note it will only be 60 quid each if we can find another 5 who may be interested , as the cost of setting up and running the veneers is too expensive to share between 4)
Pedder
GV
Dave Meredith
JVaughan

All would be subject to being happy with samples provided.


If you are interested you can email me or put up a posting.

[TVRleigh_BBWR]

HOTTY said:

Sorry about the delay in getting back

The two veneer sets i had left for the 350/390 were promised on the night

these will be sent to K4000JB/james and Digga/dan (if all goes well this week)

I have no more............but

we have 4 folks possibly interest so far, as i may be able to get the 400se dash run with the 350/390
The cost will be the same for both types at £60 including delivery (note it will only be 60 quid each if we can find another 5 who may be interested , as the cost of setting up and running the veneers is too expensive to share between 4)
Pedder
GV
Dave Meredith
JVaughan

All would be subject to being happy with samples provided.


If you are interested you can email me or put up a posting.

I know someone who will have 400SE set, if that will help