settled in at monkfish
Discussion
Exhaust cut and shut as no ground clearance, oil and filter, maybe the really expensive oil. Err kazz diff oil, rear race pads and fluid changed for race stuff, same for clutch, quick rack and setup, all the fan settings changed - job done already. ps leak fixed, cat heat shields fixed. Gear box oil level check. Coffee, lunch and no doubt using the toilet, just spotted a ps2 as well.
Umm, do I cut and shut the exhaust or cut my losses and get the wortec cat back, already got headers. Cat back on the car is standard hsv with rear boxes cut out. Not what I paid for a few years back, you live and learn.
How loud are they on a cv8 for track days, already have a sc and forged engine (let's hope so) so don't want it obscene.
How loud are they on a cv8 for track days, already have a sc and forged engine (let's hope so) so don't want it obscene.
spudmonkeybikes said:
Umm, do I cut and shut the exhaust or cut my losses and get the wortec cat back, already got headers. Cat back on the car is standard hsv with rear boxes cut out. Not what I paid for a few years back, you live and learn.
How loud are they on a cv8 for track days, already have a sc and forged engine (let's hope so) so don't want it obscene.
me i would get the wortec ..How loud are they on a cv8 for track days, already have a sc and forged engine (let's hope so) so don't want it obscene.

spudmonkeybikes said:
Umm, do I cut and shut the exhaust or cut my losses and get the wortec cat back, already got headers. Cat back on the car is standard hsv with rear boxes cut out. Not what I paid for a few years back, you live and learn.
How loud are they on a cv8 for track days, already have a sc and forged engine (let's hope so) so don't want it obscene.
it depends on your CV8.. ask the boys there they will tell you honestly how loud they are. there ex demo now does track days and that has a full wortec system.How loud are they on a cv8 for track days, already have a sc and forged engine (let's hope so) so don't want it obscene.
for me the answer would be to get a local exhaust centre to make up a bespoke system and pocket the not insignificant difference in price to use buying other mods. 600 quid or under will get you a decent stainless cat back from a reputable exhaust place every day of the week and if they know what they're about they should be able to set the volume at a level to suit your needs with the right choice of silencers. Loads of these places up here, couple with excellent reputation for quality work - would imagine the same is true where you live.
well_fans said:
for me the answer would be to get a local exhaust centre to make up a bespoke system and pocket the not insignificant difference in price to use buying other mods. 600 quid or under will get you a decent stainless cat back from a reputable exhaust place every day of the week and if they know what they're about they should be able to set the volume at a level to suit your needs with the right choice of silencers. Loads of these places up here, couple with excellent reputation for quality work - would imagine the same is true where you live.
^^WHS^^
Try www.aas-exhausts.co.uk and save yourself a small fortune.
spudmonkeybikes said:
Very, lunch well ended up with reserve pasty I bought on the way there. Mind you didn't go for the food.
Spud, nice to meet you!
I had an early start too, As soon as I got there I booked their Cav courtesy car and went to Buckingham for a full English breakfast, followed by a few hours in the sun with the ipod on
Interesting chat about you car, not an uncommon story i'm afraid.
Roger great to meet you and the guys again, and Paul Spinks too.
Roger - re my ripshifter - have you had any thoughts as to the 'problem' with it? You said it doesn't feel the same as others? it was originally fitted by the other garage, but all the bolts came loose after a few hundred miles (no loctite..) so I just tightened up all the bolts again and it's been fine since (except for the buzzing knob, which is the knob and not the lever). I haven't actually refitted the lever into the box, it's as it was. There is a detent for going into R, but only with the engine running, it seems. I've never had any gear selection issues (and it's way better than the stock change) but I'm wondering if there is a problem with the soleniod lock out operation? Or is it the lack of spring feel as you move the lever from full left to full right that's different?
Gassing Station | HSV & Monaro | Top of Page | What's New | My Stuff




hows the 
happy? .. what was for lunch