Brake discs
Author
Discussion

satsuma71

Original Poster:

177 posts

197 months

Thursday 17th June 2010
quotequote all
Getting the slight judders through the steering wheel when braking, seems from what i read that this is a common Monaro issue, as it pi**es me off, i need to change the discs, have just done a full Red Stuff pad change last week so they are fine, what discs do you guys recommend.

Sats

monkfish1

12,522 posts

255 months

Thursday 17th June 2010
quotequote all
satsuma71 said:
Getting the slight judders through the steering wheel when braking, seems from what i read that this is a common Monaro issue, as it pi**es me off, i need to change the discs, have just done a full Red Stuff pad change last week so they are fine, what discs do you guys recommend.

Sats


The disc isn't the issue. Its either rust or pad deposits creating high spots on the disc which give the problem you describe. If its not bad, performance friction pads will clean it up.

Its only if the high spot has generated sufficent heat to create a hard spot in the disc that the disc will need replacing.

Edited by monkfish1 on Thursday 17th June 19:24

satsuma71

Original Poster:

177 posts

197 months

Thursday 17th June 2010
quotequote all
Ok, will check for any rust etc.thanks for the information.

MyM8V8

9,468 posts

226 months

Thursday 17th June 2010
quotequote all
What he said. I've got the Performance friction pads from the Fish and they are bedding in very nicely now.

satsuma71

Original Poster:

177 posts

197 months

Thursday 17th June 2010
quotequote all
So the Red stuff is not good?, need better pads, discs look fine, no rust whatsoever on them.

Monaro5.7

7,337 posts

210 months

Thursday 17th June 2010
quotequote all
satsuma71 said:
So the Red stuff is not good?, need better pads, discs look fine, no rust whatsoever on them.


NOOOOOOOO if ur talking about EBC pads yellowstuff

Tattooboy

7,946 posts

209 months

Thursday 17th June 2010
quotequote all
Had same problem with mine until a full set of harder friction pads did the job smile

snowwolf

11,503 posts

206 months

Thursday 17th June 2010
quotequote all
I had the same problem on my Ro, 2006 standard discs and calipers which are better than the 2004 spec, decided to change the the discs and the calipers to 2007 VXR expecting that the slight wobble would go, but it's still present, only very slight but still noticable.

It seems to get worse the hotter the brakes get, perhaps I was unlucky that I got two sets of discs that had a fault, but I am thinking now that one hub may be at fault, I do have a spare set of hubs, when I finish working on my Land cruiser I will give the spare hubs a go and let you know how it is.