Leven - wiper blades.

[AG Tuscan II S]

Hi Chaps.

Just wondering what the common wisdom, if any, might be to re-glue the washer jets to the steel wiper arm?

I was thinking high temperature araldite?

Originally they are superglue on - but cyanoacrylate only manages about 20% of original strength at 60 degrees and is all done at 80 degrees. Considering the proximity to the hot parts, not sure if that's going to work?

[glow worm]

I used superglue with a little G type clamp to hold it while it set..never come off since.

[AG Tuscan II S]

Cheers Keith.