New noises
Author
Discussion

MadMaxHSV

Original Poster:

1,816 posts

229 months

Wednesday 23rd June 2010
quotequote all
Is it normal to have a bit of play in the supercharger drive gears.
Noticed when fitting that you could twist the drive-shaft and there is some movement with a 'donk-donk' noise (technical I know) as you rock it back and forth.
This is obviously inside the casing as the pulleys are all turning at this point.

Reason I ask is that I can hear a faint clatter from the region of the charger that I can't place. It is normal for the charger to make this noise (having not listened to one that closely before).
Thinking about it I was thinking the noise could be this play as the shaft loads and unloads during the compression strokes of the rotors causing some chatter. (reminds me of the common problem with early BMW Vanos gears and sounds vaguely similar).

May be me getting paranoid about new noises, but want to rule out any issues.

One other theory for the noise is rocker to cover interference, but didn't sound like it came from there and the pitch and frequency seems too low (will pull the covers anyway to double check).

S800VXR

5,877 posts

231 months

Wednesday 23rd June 2010
quotequote all
The charger bearings do wear, Mark and Roger have both diagnosed mine to be on the way out and needing repair just this week! Get it looked at by someone who knows. PS: not a big job to do.

MadMaxHSV

Original Poster:

1,816 posts

229 months

Wednesday 23rd June 2010
quotequote all
S800VXR said:
The charger bearings do wear, Mark and Roger have both diagnosed mine to be on the way out and needing repair just this week! Get it looked at by someone who knows. PS: not a big job to do.
Brand new charger so hopefully not wink
It's not bearings anyway, it's more like slop in the internal transfer gears.

ringram

14,702 posts

279 months

Wednesday 23rd June 2010
quotequote all
Sometimes dont you just wish you had run NA biggrin

MadMaxHSV

Original Poster:

1,816 posts

229 months

Wednesday 23rd June 2010
quotequote all
ringram said:
Sometimes dont you just wish you had run NA biggrin
haha....no wink
Very happy, just a few niggles to iron out or accept as the new norm smile

donk r8

2,755 posts

227 months

Wednesday 23rd June 2010
quotequote all

Mine has only been on for a couple of months (same as yours) and is now a lot quieter than it was when I first picked it up.........assume its bedded in

monkfish1

12,522 posts

255 months

Wednesday 23rd June 2010
quotequote all
There will be a very small amount of backlash in the gears. At idle their will be some "chatter". But i mean a small amount. If their is a lot the drive coupling may have failed. Seems unlikely on a new TVS.

MadMaxHSV

Original Poster:

1,816 posts

229 months

Thursday 24th June 2010
quotequote all
Cheers,
It seems to be normal (also concensus across the pond also). Been suggested the upgraded tensioner reduces it (which I can see the logic, stock one moves around a lot even at idle). This will be going on at some point so so what it does.

I'll have a listen to yours Donk on Sunday if thats ok as a compare? smile

monkfish1

12,522 posts

255 months

Thursday 24th June 2010
quotequote all
MadMaxHSV said:
Cheers,
It seems to be normal (also concensus across the pond also). Been suggested the upgraded tensioner reduces it (which I can see the logic, stock one moves around a lot even at idle). This will be going on at some point so so what it does.

I'll have a listen to yours Donk on Sunday if thats ok as a compare?


Big tensioner does what it says

MadMaxHSV

Original Poster:

1,816 posts

229 months

Thursday 24th June 2010
quotequote all
Do you keep them smile

monkfish1

12,522 posts

255 months

Thursday 24th June 2010
quotequote all
Sadly not.Can alwys get one with my next order if you are not desperate.

MadMaxHSV

Original Poster:

1,816 posts

229 months

Thursday 24th June 2010
quotequote all
monkfish1 said:
Sadly not.Can alwys get one with my next order if you are not desperate.
No worries, i'll let you know.
Can you supply a spare 6-rib belt though? Got a long trip coming up and would like a spare in case I throw the current one for some reason.
...will drop you an email smile

Edited by MadMaxHSV on Thursday 24th June 09:48