122hh SH Value
Author
Discussion

S800VXR

Original Poster:

5,877 posts

231 months

Thursday 24th June 2010
quotequote all
Knowing that my big engine will struggle a little top end with the current 122 I will be looking to trade it on sometime late this year for a TVS2300. Whats the value of these now adays - the SH 122 that is...?

anonymous-user

85 months

Thursday 24th June 2010
quotequote all
Sold mine for 4.5k but the bearings weren't ed. Id get some new heads first if I were you.

007 VXR

64,187 posts

218 months

Thursday 24th June 2010
quotequote all
imho 3/3.5k

anonymous-user

85 months

Thursday 24th June 2010
quotequote all
Also be aware the 2300 is a monster when its wound up. Mines eaten 2 clutches, one diff and my block. Be sensible though and you will have a build that makes good power in all weather.

after_shock

8,751 posts

251 months

Thursday 24th June 2010
quotequote all
Are you likely to be selling it including the IC?

007 VXR

64,187 posts

218 months

Thursday 24th June 2010
quotequote all
after_shock said:
Are you likely to be selling it including the IC?
dont think anyone would buy it with out the IC

after_shock

8,751 posts

251 months

Thursday 24th June 2010
quotequote all
007 VXR said:
after_shock said:
Are you likely to be selling it including the IC?


dont think anyone would buy it with out the IC


Yeah would think that, leaves me with a problem to sell mine as it aint got an IC!!

monkfish1

12,522 posts

255 months

Thursday 24th June 2010
quotequote all
after_shock said:
007 VXR said:
after_shock said:
Are you likely to be selling it including the IC?


dont think anyone would buy it with out the IC


Yeah would think that, leaves me with a problem to sell mine as it aint got an IC!!


That will sell, no problem.

after_shock

8,751 posts

251 months

Thursday 24th June 2010
quotequote all
monkfish1 said:
after_shock said:
007 VXR said:
after_shock said:
Are you likely to be selling it including the IC?


dont think anyone would buy it with out the IC


Yeah would think that, leaves me with a problem to sell mine as it aint got an IC!!


That will sell, no problem.


Good to hear, if could get a 112 with IC for sensible money would consider doing that as an upgrade to mine and shifting the current charger at the same time would make sense.

Otherwise will wait till next year and go TVS or Centri.

SimonV8ster

13,040 posts

259 months

Thursday 24th June 2010
quotequote all
Don't you have a 112 ?

after_shock

8,751 posts

251 months

Friday 25th June 2010
quotequote all
SimonV8ster said:
Don't you have a 112 ?


Yes indeed I do, me being daft whilst typing meant a 122 lol

crisisjez

9,209 posts

236 months

Friday 25th June 2010
quotequote all
after_shock said:
SimonV8ster said:
Don't you have a 112 ?


Yes indeed I do, me being daft whilst typing meant a 122 lol


Having upgraded from a 112 to a 122 I'd say don't waste your money.

ringram

14,702 posts

279 months

Friday 25th June 2010
quotequote all
I suspect the same applies for 122 to 2300tvs, incremental advance.
As Wormus, who should know, says, look at heads and cam if they are not already done. You want airflow NOT boost. There is a difference. If you could obtain a certain airflow without boost you would be much better off.

after_shock

8,751 posts

251 months

Friday 25th June 2010
quotequote all
crisisjez said:
after_shock said:
SimonV8ster said:
Don't you have a 112 ?


Yes indeed I do, me being daft whilst typing meant a 122 lol


Having upgraded from a 112 to a 122 I'd say don't waste your money.


Appreciate the advice!

after_shock

8,751 posts

251 months

Friday 25th June 2010
quotequote all
ringram said:
I suspect the same applies for 122 to 2300tvs, incremental advance.
As Wormus, who should know, says, look at heads and cam if they are not already done. You want airflow NOT boost. There is a difference. If you could obtain a certain airflow without boost you would be much better off.


Last time I started a thread about heads with FI everyone said simply dont bother with the heads just do the cam!! Which will be getting changed with the internals later in the year.

crisisjez

9,209 posts

236 months

Friday 25th June 2010
quotequote all
If you do heads and cam with a 112 you'll turn your car into a wheezy diesel as the blower will never, ever, make enough boost to satisfy it. Nor will a 122.

If you do heads and cam, bearing in mind you don't really like the power delivery of the PD blower anyway, I'd suggest you go for a centri blower.

Why not chat up TerrysS for a run in his

after_shock

8,751 posts

251 months

Friday 25th June 2010
quotequote all
crisisjez said:
If you do heads and cam with a 112 you'll turn your car into a wheezy diesel as the blower will never, ever, make enough boost to satisfy it. Nor will a 122.

If you do heads and cam, bearing in mind you don't really like the power delivery of the PD blower anyway, I'd suggest you go for a centri blower.

Why not chat up TerrysS for a run in his


Im still leaning onto the centri side of things, wont be till next year need to forge it first then go from that point. Main aim is to get the power delivery I like which exactly as you say the PD wont give me.

ringram

14,702 posts

279 months

Friday 25th June 2010
quotequote all
Correct, in any engine the cam is determinant of the biggest restriction, period.
IMO no point changing anything else unless you also change the cam...

007 VXR

64,187 posts

218 months

Friday 25th June 2010
quotequote all
crisisjez said:
If you do heads and cam with a 112 you'll turn your car into a wheezy diesel as the blower will never, ever, make enough boost to satisfy it. Nor will a 122.
what if you keep the boost down scratchchin say 9psi with cam ??
(talking 122)

after_shock

8,751 posts

251 months

Friday 25th June 2010
quotequote all
007 VXR said:
crisisjez said:
If you do heads and cam with a 112 you'll turn your car into a wheezy diesel as the blower will never, ever, make enough boost to satisfy it. Nor will a 122.



what if you keep the boost down scratchchin say 9psi with cam ??
(talking 122)


Im sure someone else will explain it technically but if the engine can flow alot more air than standard i.e heads and cam have been done then the charger wont work well, its probably a simple calculation pressure vs flow rates but the charger only moves so much air with a given boost and if the engine is too free flowing basically the charger cant move enough air to work properly.