Discussion
MartinD said:
Is ep90 suitable for the diff on the Monaro?
Going to give the car a going over tomorrow and change/top up some fluids and I've got some of that available
What oils would you recommend for the engine, gearbox and diff?
Going to give the car a going over tomorrow and change/top up some fluids and I've got some of that available
What oils would you recommend for the engine, gearbox and diff?
I can get you Comma oil for the engine and it meets 2 of the 3 specs for ur car and gearbox and diff u wanna change them over 2 Royal Purple which again i can put u onto a place that does it for a very good price.
MartinD said:
My plan is/was to do all of this tomorrow afternoon before the meet. The reason I was suggesting EP90 is because we've got it to hand (read: my mate has it to hand)
I spose I could get stuff from you and then take it through.. are you working tomorrow morning?
I spose I could get stuff from you and then take it through.. are you working tomorrow morning?
Iam working tomorrow mate 8-12.30 if u wanna come get some engine oil just let me know

pit will be better, need to get gearbox hot, there is a plug that says "do not remove" dont remove it :-) make sure you can remove the reverse switch plug before you take the drain plug out, (be aware it will gush out, as it is filled with TQF)
Drain box, fill to the "do not remove plug" then put plug back in, then remove reverse gear switch plug which is the opp side of the box, then fill with 1 litre of oil.
Drain box, fill to the "do not remove plug" then put plug back in, then remove reverse gear switch plug which is the opp side of the box, then fill with 1 litre of oil.
gsd2000 said:
Just wanted to add, royal purple gearbox oil stinks
sure dose,I thought the stuff in my peugeot gearbox smelt bad but RP takes things to a new level.
that said i've been impressed with the difference it's made to my gear change in the Ro and also when i had the diff oil changed
MartinD said:
I'm a bit confused....
How are you meant to know when it's filled to the 'do not remove' plug.. and if you're not removing it, why would you be putting it back in?
I was confused when I come across the "do not remove plug" I think it says that because you will get covered in oil of you do. just make sure both the fill plugs will undo, that being the plug mentioned above and the reverse sensor plug.How are you meant to know when it's filled to the 'do not remove' plug.. and if you're not removing it, why would you be putting it back in?
Then remove the drain plug, refill to the level of the labeled "do not remove plug" put that plug back in, then remove the reverse sensor and add one litre of oil, job done.
The way I've always done any diff or gearbox oil changes are:
1) Remove drain plug and catch old oil
2) Refit drain plug and remove fill plug
3) Fill oil until it runs out the fill plug.
Job done!
Is that not the case with the Monaro?
(bear in mind I haven't had a look at these things yet - It'll be over a pit for the first time tomorrow)
1) Remove drain plug and catch old oil
2) Refit drain plug and remove fill plug
3) Fill oil until it runs out the fill plug.
Job done!
Is that not the case with the Monaro?
(bear in mind I haven't had a look at these things yet - It'll be over a pit for the first time tomorrow)
MartinD said:
The way I've always done any diff or gearbox oil changes are:
1) Remove drain plug and catch old oil
2) Refit drain plug and remove fill plug
3) Fill oil until it runs out the fill plug.
Job done!
Is that not the case with the Monaro?
(bear in mind I haven't had a look at these things yet - It'll be over a pit for the first time tomorrow)
One thing I have learnt is not to remove the drain plug until you know for sure the fill plugs will come undone, last thing you want to do is drain oil out and not to be able to fill it back up1) Remove drain plug and catch old oil
2) Refit drain plug and remove fill plug
3) Fill oil until it runs out the fill plug.
Job done!
Is that not the case with the Monaro?
(bear in mind I haven't had a look at these things yet - It'll be over a pit for the first time tomorrow)
snowwolf said:
pit will be better, need to get gearbox hot, there is a plug that says "do not remove" dont remove it :-) make sure you can remove the reverse switch plug before you take the drain plug out, (be aware it will gush out, as it is filled with TQF)
Drain box, fill to the "do not remove plug" then put plug back in, then remove reverse gear switch plug which is the opp side of the box, then fill with 1 litre of oil.
What's the 1 litre of oil bit about? Is that just a rough guestimate as to what it takes after the first plug?Drain box, fill to the "do not remove plug" then put plug back in, then remove reverse gear switch plug which is the opp side of the box, then fill with 1 litre of oil.
MartinD said:
snowwolf said:
pit will be better, need to get gearbox hot, there is a plug that says "do not remove" dont remove it :-) make sure you can remove the reverse switch plug before you take the drain plug out, (be aware it will gush out, as it is filled with TQF)
Drain box, fill to the "do not remove plug" then put plug back in, then remove reverse gear switch plug which is the opp side of the box, then fill with 1 litre of oil.
What's the 1 litre of oil bit about? Is that just a rough guestimate as to what it takes after the first plug?Drain box, fill to the "do not remove plug" then put plug back in, then remove reverse gear switch plug which is the opp side of the box, then fill with 1 litre of oil.
Gassing Station | HSV & Monaro | Top of Page | What's New | My Stuff




