GT Tdi (130) cooling fan replacement
GT Tdi (130) cooling fan replacement
Author
Discussion

holmbush

Original Poster:

105 posts

212 months

Tuesday 29th June 2010
quotequote all
It's broken - just as they all said it would! The larger of the two cooling fans has ceased to operate and will have to be replaced. My question is - how easy or difficult is it to do? Any tips would be very welcome as I am not particularly familiar with the oily bits. Thanks guys.

holmbush

Original Poster:

105 posts

212 months

Wednesday 30th June 2010
quotequote all
No offers? Surely somebody out there has experienced this - any help would be appreciated.

stufirewalker

8 posts

201 months

Monday 27th September 2010
quotequote all
If its anything like my A6 2.5tdi fan it looks a pig to do. One thing I did find out was that the brushes in the fan wear out quickly, tapping the motor where the wiring loom enters it might bring it back to life, as mine has. Still, europarts want £61 for a replacement.

Tame Technician

2,467 posts

235 months

Tuesday 28th September 2010
quotequote all
Four screws one electrical connector, to remove the fan housing, a few 10mm's on each fan motor and route the wires. We only get about 0.5 to do them if that.

But you need the car at least the hieght of the fan cowl off the ground, as it drops out the bottom.

FunkySon

139 posts

254 months

Wednesday 29th September 2010
quotequote all
Have you lost it completely or just the low speed mode that disappears when the resistor in the fan burns out?

If you've just lost the low speed then you could always do a wiring mod to overcome it. That's what I did a few years back and it's still working fine despite my cack handedness. The mod is documented in a couple of places on the net I think. I picked it up off the uk mkivs web site.

Duncan