Wedge parts at BBWF

[rev-erend]

List below any spare parts you have to give away, sale, swap etc :

Rev has :
2 * Fulda tyres 225/50 ZR 15 (very rare ZR !) 6mm tread left ..
both have been stored out of the light but are fairly old : £10 each

Stainless steel centre box with no baffles - previous Loudest BBWF winner
2 inch inlets to box (clamps and pipe flanges excellent) .. 3 inch straight
outlet (not over axe type outlet) £10

RV8 pre serp oil pressure tool £7 (Half purchase price)

RV8 pre serp oil pressure sender (wedge V8) I bought new old TVR stock
off ebay for £18, still with original TVR price tag of 40 quid plus ..
someones for £12.

Edited by rev-erend on Wednesday 30th June 10:06

[Trickie Dickie]

I have a brand new 350i water temp sensor which I got off Fleabay
for my 400 but different fitting in engine block so no use

For the cost of a beer?

Richard

[Flyin Banana]

Oh an autojumble, i'd better remorgage the house!!!


I might have a set of 15" OZ split rims, not sure what i'm doing with them yet

Rob

Edited by Flyin Banana on Wednesday 30th June 10:59

[matt-man]

rev-erend said:

List below any spare parts you have to give away, sale, swap etc :

Stainless steel centre box with no baffles - previous Loudest BBWF winner
2 inch inlets to box (clamps and pipe flanges excellent) .. 3 inch straight
outlet (not over axe type outlet) £10

Edited by rev-erend on Wednesday 30th June 10:06

My neighbours would love me.....!!!!

[Wedg1e]

I have a workdhop full of injection spares so if anyone needs anything particular, shout up and I'll bring bits along. Everything from inlet manifold upwards

Could run off some plenum insulators as well, if anyone's in the mood... got 6mm and 10mm material in stock... could maybe mill a shortened trumpet base as well, depends on what BPJs I have to do in the next fortnight...

(BPJ = Brownie Points Job, ie household tasks such as fitting doors, mowing lawns, catching spiders...)

[Mr Tank]

Hi

Will have a Zender spoiler for sale at BBWF (Pic Attached)

[rev-erend]

matt-man said:

rev-erend said:

List below any spare parts you have to give away, sale, swap etc :

Stainless steel centre box with no baffles - previous Loudest BBWF winner
2 inch inlets to box (clamps and pipe flanges excellent) .. 3 inch straight
outlet (not over axe type outlet) £10

Edited by rev-erend on Wednesday 30th June 10:06

My neighbours would love me.....!!!!

One day we will all need to meet at your place

[adam quantrill]

Bugger! An autojumble! I just gave away a load of bits too... ;^)

Rev is making the most of his non-wedge transport I see. Don't forget most of the rest of us won't have space for spare pairs of tyres!!!

Right then - one locking petrol cap, £3000, comes with 350i attached ;^)

Oh yeah - and I'll have the shiney new V8 pressure caps, last 40 left £2.50 each (50p goes to the charity). Get 'em while you can!
Anyone want anything (not too bulky) off my parts hoard, please let me know....

Edited by adam quantrill on Wednesday 30th June 23:33

[Mr Tank]

Now that's an idea

I can bring my other 350i on a trailer and sell it in kit form to fellow BBWF attendies!

The trailer would also mean I can bring a lot of my new spare parts.

Now what should I bring?

Great Idea I think!

Andy

[gsx600]

Hmm

Just a few bits I've found so far

wiring loom
starter motor
hot wire inj rail with 16 inj
resistor pack
coil
400 dash - the fibreglass bit
door trims - the fibreglass bit
gearbox
4.5 big valve heads
polished rocker covers
polished rocker covers
polished rocker covers
rear tie bars SH
horns
wiper motor
wiper motor
pod motor
pod motor
polished plenum 3 inch inlet
polished plenum 4 inch inlet
engine mounts
inlet hotwire
inlet flapper
clutch master
passenger door 350
drivers door 350
bonnet 350
seat belts
brake servo

[TVRleigh_BBWR]

gsx600 said:

Hmm

Just a few bits I've found so far

wiring loom
starter motor
hot wire inj rail with 16 inj
resistor pack
coil
400 dash - the fibreglass bit
door trims - the fibreglass bit
gearbox
4.5 big valve heads
polished rocker covers
polished rocker covers
polished rocker covers
rear tie bars SH
horns
wiper motor
wiper motor
pod motor
pod motor
polished plenum 3 inch inlet
polished plenum 4 inch inlet
engine mounts
inlet hotwire
inlet flapper
clutch master
passenger door 350
drivers door 350
bonnet 350
seat belts
brake servo

Let me know what you want for the Gearbox, rear tie bars SH and clutch master

[Mr Tank]

Hi

Items I can think off to bring (More to follow)

New soild front disc's
New Throttle cables for S2 on wards.
New Shiney (Chrome) thermostate housing.
Zender spoiler (See earlier post)

I have other items which I will bring if anybody want's them for small amount of beer tokens (But you need to contact me)

Drivers doors.
Bonnet for S2 etc.
Sill's (350i)
Boot lids.

Andy.

[Transmitter Man]

Alan,

I'll try and remember to bring your PS pump etc back.

I'm going Corsa ePAS.

Shaun,

Your front cover (I had it vaqua blasted for you so it looks new)

I'll bring the following for sale:

A professionally rebuilt Cortina V6 PS rack

Set of RV8 rocker covers

SH tie bars for Wayne

I have a pucka bolt-in roll cage but don't think it will fit in the hack tourer I'll be driving so have to collect from Essex.

I'm after a 5 clock complete dash and centre console.

May have other parts.

Phil
420 SEAC

[2 sMoKiN bArReLs]

Some original sales brochures anybody?








Yours for a few pieces of silver

[HOTTY]

Transmitter Man said:

I'm after a 5 clock complete dash and centre console.

Phil
I am sure that you and paul(gxs600) are bound to link up as he has the glassfibre dash you are looking for, I presume it's from his 400SE and equally presume that you would be covering in new leather. the only thing you would need would be the metal backing plate that holds all the dails and the metal face plate you stick the veneer to.
You would not need the RPM bit, ie the two metal plates as they are the same size as the one off your SEAC dash, you would need the glove box and the matching metal plate.

HOTTY

[gsx600]

HOTTY said:

Transmitter Man said:

I'm after a 5 clock complete dash and centre console.

Phil
I am sure that you and paul(gxs600) are bound to link up as he has the glassfibre dash you are looking for, I presume it's from his 400SE and equally presume that you would be covering in new leather. the only thing you would need would be the metal backing plate that holds all the dails and the metal face plate you stick the veneer to.
You would not need the RPM bit, ie the two metal plates as they are the same size as the one off your SEAC dash, you would need the glove box and the matching metal plate.

HOTTY

I also have those bits so you would just need to recover and could possibly fill in the bit where the handbrake goes so you can still use your original handbrake ?

[Transmitter Man]

Hi Stephen,

OK, hunt me down any-time Saturday and let's have a chat.

Sounds easier than what I thought.

I thought the centre console were a different size and not just with or without hole for handbrake?

My veneer is new and beautiful so would hope to swap that with someone's 5-clock dash version.

Phil
420 SEAC

[AM400]

gsx600 said:

Hmm

Just a few bits I've found so far

wiring loom
starter motor
hot wire inj rail with 16 inj
resistor pack
coil
400 dash - the fibreglass bit
door trims - the fibreglass bit
gearbox
4.5 big valve heads
polished rocker covers
polished rocker covers
polished rocker covers
rear tie bars SH
horns
wiper motor
wiper motor
pod motor
pod motor
polished plenum 3 inch inlet
polished plenum 4 inch inlet
engine mounts
inlet hotwire
inlet flapper
clutch master
passenger door 350
drivers door 350
bonnet 350
seat belts
brake servo

Paul, do you have the metal trim with "wood effect paint" for the door panels?
Would be interested in a pair of those.

Thanks, Andy

[Wedg1e]

gsx600 said:

Hmm

Just a few bits I've found so far


seat belts

Are they sound or as frayed as a Nottingham tart's undercrackers? Could be interested as my belts are starting to resemble the aforementioned cami's...

[CarbonWedge]

Transmitter Man said:

Alan,

I have a pucka bolt-in roll cage but don't think it will fit in the hack tourer I'll be driving so have to collect from Essex.

Hi Phil,

How much would you like for the roll cage, i've been after one for ages! I travel down to Essex at least once a week.

Cheers

Paul